Brass & Copper Solder Fittings

Brass and copper solder fittings are pre-soldered fittings used predominantly in plumbing systems to connect copper pipes.

How do brass and copper solder fittings work?

Brass and copper solder fittings use the principle of capillary action to ensure that, when correctly joined to copper tube, a sufficient layer of lead-free solder is present between tube and fittings to form a mechanically strong, leak proof joint without the need for external solder application. Both the pipes and the fitting should be cleaned with wire wool before use. You can then slide the pipes into the fitting, ensuring that they're pushed all the way in, and apply heat to the rings of solder (indicated by ridges on the outside of the fitting) to secure the joint.

What are brass and copper solder fittings used for?

These fittings can be used to help convey drinking water, light mineral oils, natural or liquid petroleum gases or compressed air. They come in straight, elbow, T-shaped and reducer configurations, depending on your needs.


...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Fitting Direction Fitting Type Compatible Pipe Size Material Solder Type
RS Stock No. 797-079
Mfr. Part No.TP1215
£0.527
Each (In a Pack of 25)
Units
90° Elbow 15 x 15mm Copper Solder Ring
RS Stock No. 797-007
Mfr. Part No.TP0115
£0.326
Each (In a Pack of 25)
Units
Straight Coupler 15 x 15mm Copper Solder Ring
RS Stock No. 797-085
Mfr. Part No.TP1222
£1.166
Each (In a Pack of 10)
Units
90° Elbow 22 x 22mm Copper Solder Ring
RS Stock No. 796-212
Mfr. Part No.TP01R2815
£4.42
Each (In a Pack of 2)
Units
Straight Reducer Coupler 28 x 15mm Copper Solder Ring
RS Stock No. 797-114
Mfr. Part No.TP2415
£1.116
Each (In a Pack of 10)
Units
- Equal Tee 15 x 15 x 15mm Copper Solder Ring
Related Products
Assembled with a probe, forms a quick acting ...
Description:
Assembled with a probe, forms a quick acting coupler adapted to applications using water and compressed air. Flow : 2200 Nl/min (78 cfm)Straight throughMaximum working pressure: 20 bar, 2 MPa 290 psiWorking temperature: -20 → +100 °C"O" - ring: NBRSpring: Stainless steel.
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 ...
Description:
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C. No need to prepare threaded pipe or apply solventEasy and quick to install, simple push-in connectionsSafe, secure and leak-proof, ready for immediate useUnique collet locking system holds tube firmly without deformation or flow restrictionEasy ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar at 65°C.Unsuitable for use with stainless steel pipe. Chrome-plated brass ...
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.