Process Pump Controllers

Filters

Viewing 1 - 9 of 9 products
Results per page
Description Price Compatible Pump Type Supply Voltage Connection IP Rating Maximum Flow Rate Maximum Fluid Temperature Maximum Output Pressure
RS Stock No. 125-3567
BrandRS PRO
£50.92
Each
Units
Brushless Micropump 12 → 30 V dc 2 Screw Terminal (Input), 3 Screw Terminal (Output) - - - 10bar
RS Stock No. 125-3568
BrandRS PRO
£50.92
Each
Units
Brushless Micropump 12 → 30 V dc 2 Screw Terminal (Input), 3 Screw Terminal (Output) - - +80°C 10bar
RS Stock No. 125-3571
BrandRS PRO
£50.92
Each
Units
Brushless Micropump 12 → 30 V dc 2 Screw Terminal (Input), 3 Screw Terminal (Output) - - +80°C -
RS Stock No. 125-3569
BrandRS PRO
£50.92
Each
Units
Brushless Micropump 12 → 30 V dc 2 Screw Terminal (Input), 3 Screw Terminal (Output) - - +80°C 10bar
RS Stock No. 667-9154
Mfr. Part No.8AF12
£85.83
Each
Units
Diaphragm 220 V, 240 V 1 in R Male IP65 1000L/h +60°C 10bar
RS Stock No. 348-7949
Mfr. Part No.FCHM
BrandCynergy3
£106.83
Each
Units
- 240 V ac 1 in G IP65 100L/min +60°C 10bar
RS Stock No. 348-7977
Mfr. Part No.FCTE45
BrandCynergy3
£28.19
Each
Units
- 250 V ac - IP21 - +45°C -
RS Stock No. 144-9307
Mfr. Part No.10073LDAA
BrandXylem
£1,370.46
Each
Units
- 415 V ac - IP55 - - -
RS Stock No. 182-9996
Mfr. Part No.G2ASMA20
BrandTele
£109.75
Each
Units
- 250 V ac - IP20, IP40 - - -
Related Products
The Burkert flow transmitter has an output current ...
Description:
The Burkert flow transmitter has an output current of 4-20mA and a cable gland electrical connection device. It is designed for continuous flow measurement and batch control. It is specially designed for use in neutral and aggressive, solid-free liquids. The transmitter is made of a compact fitting and an electronic ...
Two wall mounting control units and adaptor mount ...
Description:
Two wall mounting control units and adaptor mount transmitter module designed to provide precise control of liquid flow quantities. Induces a measured frequency into a transducer which is proportional to the flow rate. Selectable dosage mode, overfill correction, allocation of relay parameters, alarm relay activation and resetting of main and ...
Adjustment of the metering rate directly in l/h ...
Description:
Adjustment of the metering rate directly in l/h or gph Simple tube change No problems with very gaseous media or air locks Suitable for viscosities of up to 10,000 m PasSole contact with media in the tube Many different control options, such as using an analogue 0/4-20 mA signal, contact ...
The LV8549M is a 2-channel low saturation voltage ...
Description:
The LV8549M is a 2-channel low saturation voltage forward/reverse motor driver IC. It is optimal for Full step motor drive in 12V system products. Single-channel PWM current control stepping motor driver (selectable with DC motor driver channel 2) incorporated BiCDMOS process ICMicro step mode can be set to full-step, half-step ...