Central Heating Pumps

Central heating pumps are mechanical devices which sit in your heating system and pump the hot water around. The heating pump forces the hot water to travel quickly from your boiler to your radiator and back.
Central heating pumps are located near a boiler or hot water tank. They are essential components within a heating system as, if it breaks, your heating system will not heat up properly.

How do heating pumps work?
Water is fed into the pump via a pipe, shortly after the boiler has heated the water. The heating pump is a centrifugal pump which uses impellers which move the fluid by rotating. This rotation pushes the water along with speed through the water flow outlet and along to the radiator system.
Heating pumps also connect to an electricity supply to provide the energy to power the impellers.
There are controls on the pump which adjusts the water pressure. There will also be a bleed screw to release air bubbles if your pump is not functioning as it should.

Why are heating pumps important?
As the hot water travels from your boiler, it will begin to lose heat. Therefore the central heating pump will force the water along quicker so that it is still hot when it reaches your radiator. If the water circulating in your central heating is hotter, your radiators will be hotter, and therefore the room will heat more efficiently.

Where are they used?
Heating pumps are used in central heating in domestic or commercial systems.

...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Power Supply Type Maximum Head Maximum Working Pressure Connection Housing Material Maximum Temperature Supply Voltage Thread Size Thread Standard Fluid Temperature Range Minimum Temperature
RS Stock No. 706-6934
£232.19
Each
Units
Electric 2.7m 10 bar 1/2 in BSP Brass +95°C 8 → 24 V 1/2in BSP -10 → +95°C -10°C
RS Stock No. 706-6931
Mfr. Part No.605008263
£184.06
Each
Units
Electric 5.7m 6 bar 1-1/2 in G Cataphoretically Coated Iron +95°C 230 V 1-1/2in G -10 → +95°C -10°C
RS Stock No. 706-6940
Mfr. Part No.D5 Solar 38/700B
£214.71
Each
Units
Solar 2.7m 10 bar 1/2 in BSP Brass +95°C 8 → 24 V dc 1/2in BSP -10 → +95°C -10°C
RS Stock No. 706-6937
Mfr. Part No.605008200
£153.28
Each
Units
Electric 3.6m 6 bar 1-1/2 in BSP - +95°C 230 V ac 1-1/2in BSP -10 → +95°C -10°C
RS Stock No. 737-9817
Mfr. Part No.EBV15-1/65
£156.29
Each
Units
Electric 1.2m 10 bar 1/2 in G Brass +110°C 230 V 1/2in G -10 → +110°C -10°C
Related Products
For transfer, demand delivery, filtration, high flow booster, ...
Description:
For transfer, demand delivery, filtration, high flow booster, beverage dispensing and continuous reverse osmosis applicationsSpecific gravity: 30 maximumSelf priming (up to 2m head)Quiet and energy efficientIngress protection to IP44AD4/90 continues to run in closed valve conditions liquid being re-circulated via an internal bypass valve, AD500 ceases to run in closed ...
Portable diaphagm pump for water and light water-based ...
Description:
Portable diaphagm pump for water and light water-based chemicals, diesel and light oils. Glass filled polypropylene Flojet Quad pump head fitted with santoprene elastomers and EPDM valves. Rapid self-priming to 1.5 mAllows smooth flowCan run dry without damageSeal-less designRobust, light weight and portable.
Description:
The D200 series of pumps from RS Pro are constructed from glass filled nylon or aluminium alloy, with stainless steel tubing connectors. They are fitted with Nitrile/Silicon diaphragm and valves as standard. The pump uses Push Fit connectors designed for 2.4 mm bore flexible tubing. • High efficiency• Variable flow ...
Heavy duty diaphragm pumps. Suitable for many applications ...
Description:
Heavy duty diaphragm pumps. Suitable for many applications including chemical spraying, misting and filtration systems. Suitable for water and light water-based chemicals. Pumps can be situated above water level. Models available for 12 Vdc, 24 Vdc and 230 Vac applications. Self-priming up to 2 mMaximum liquid temperature 60°CCan run dry ...