Surface Mount Fixed Resistors

Resistors are referred to as a Passive Component. Surface Mount Resistors are more commonly known as SMD (surface mount device) or SMT (Surface mount technology) Resistors. These resistors offer advantages in space saving on Printed Circuit Boards (PCB’s).


Some common package sizes are 0201,0402,0603,0805,1206,1210,2020,2512


SMD - Some common package sizes are 0201,0402,0603,0805,1206,1210,2020,2512


Resistors are used in large volumes and are the preferred choice in electronics equipment due to their small size and high reliability. SMD resistors are particularly used in telecommunication, automotive (AEC Q200 qualified) and medical equipment, they also found in personal devices, displays and advanced technology research instruments.


SMD Fixed Resistors


Surface mount fixed resistors are the most widely used resistors as they reduce the flow of the electrical current in circuits. Similar to water flowing along a pipe, the tap controls the flow of water, a resistor controls the flow of current. They work to a fixed value the resistance does not change in temperature or voltage. The most commonly used fixed resistors values are 100KΩ,10kΩ,100Ω, 10Ω


Types of surface mount fixed resistors


  • Thin Film Resistors have a higher precision than the thick film

  • Thick Film Resistors are used for general use due to a lower price point

  • Moulded Wirewound Resistors offer higher power

  • Foil Resistors for ultra-high precision and really low-Temperature coefficient of resistance

  • Shunts (current sense) Low ohmic values for where current measurement is critica

  • Melf (cylindrical) offering superb pulse load capability

What are surface mount fixed resistors used for?


SMD fixed resistors are very compact and used in most electronic board design. Due to their compact size and the continuous development of ever smaller footprints, this has allowed for the development of ever smaller PCB designs and the ability to get more from the board. The resistors can assist in the reduction of component count on the board.


High Power / Surge / pulse protection


Many manufacturers offer a higher power alternative for the various packages they have available. As an example the 0603 resistor package can vary from 0.1W to 0.25W (rated dissipation 70°C). The higher power alternatives can be used in applications where there is a need to protect against surges / pulses.


What is the difference between Thin Film Resistors and Thick Film Resistors?


The main difference being that the thick film resistors have a paste fired on to the manufacturers chosen substrate. Thin film resistors as the name suggests has an extremely thin metal film that is generally vacuum deposited on to the manufacturers chosen substrate.


...
Read more Read less

Filters

Viewing 81 - 100 of 30594 products
Results per page
Description Price Resistance Package/Case Technology Tolerance Power Rating Temperature Coefficient Automotive Standard Dimensions Length Depth Height Series Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 802-9683
BrandRS PRO
£0.005
Each (On a Reel of 5000)
Units
5.6kΩ 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-7234
BrandRS PRO
£0.001
Each (On a Reel of 10000)
Units
16kΩ 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 804-7072
BrandRS PRO
£0.001
Each (On a Reel of 10000)
Units
100Ω 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 717-1572
BrandRS PRO
£0.003
Each (On a Reel of 5000)
Units
0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 804-7044
BrandRS PRO
£0.001
Each (On a Reel of 10000)
Units
51Ω 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 802-9844
BrandRS PRO
£0.003
Each (On a Reel of 5000)
Units
750kΩ 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-6506
BrandRS PRO
£0.002
Each (On a Reel of 5000)
Units
6.2kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-6596
BrandRS PRO
£0.002
Each (On a Reel of 5000)
Units
82kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 713-6998
BrandRS PRO
£0.004
Each (On a Reel of 5000)
Units
4.7kΩ 0805 (2012M) Thick Film ±5% 0.125W ±200ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 804-8987
BrandRS PRO
£0.001
Each (On a Reel of 5000)
Units
47kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 802-9728
BrandRS PRO
£0.003
Each (On a Reel of 5000)
Units
22kΩ 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-7173
BrandRS PRO
£0.001
Each (On a Reel of 10000)
Units
2.2kΩ 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 717-1370
BrandRS PRO
£0.005
Each (On a Reel of 5000)
Units
237kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 804-7041
BrandRS PRO
£0.001
Each (On a Reel of 10000)
Units
33Ω 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 802-9510
BrandRS PRO
£0.003
Each (On a Reel of 5000)
Units
47Ω 0603 (1608M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-7060
BrandRS PRO
£0.001
Each (On a Reel of 10000)
Units
75Ω 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-8681
BrandRS PRO
£0.001
Each (On a Reel of 5000)
Units
10Ω 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-8956
BrandRS PRO
£0.001
Each (On a Reel of 5000)
Units
27kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-6445
BrandRS PRO
£0.002
Each (On a Reel of 5000)
Units
1.2kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-6467
BrandRS PRO
£0.002
Each (On a Reel of 5000)
Units
2kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - RS -55°C +155°C