Energy label

Compare list full


Rigid couplings do not permit radial or axial motion in the shaft between the driver and the driver unit, so they operate as a single shaft. Rigid couplings are primarily used in vertical applications. A few types of rigid couplings include, flanged, split and compression.

Flanged couplings comprise of 2 halves, one on the driver shaft and the other on the driven shaft. Once bolted together they form a solid connection. Flanged couplings are most often used in vertical pump shafts.

Split rigid couplings are basically a sleeve that is split horizontally along the shaft and held together with bolts. They are clamped over the adjoining ends of the driver and driven shafts, forming a solid connection. Clamp couplings are used primarily on vertical pump shafting.

Rigid compression couplings are comprised of three pieces, the core and two coupling halves that apply force to the core. When the coupling halves are bolted together, the core is compressed down on the shaft by the two halves and the resulting frictional grip transmits the torque without the use of keys.



Rigid Couplings | RS

Rigid Couplings

Ruland Shaft Coupling Coupler 45mm Outside Diameter

Ruland Shaft Coupling Coupler 18mm Outside Diameter

Ruland Shaft Coupling Coupler 53mm Outside Diameter

Ruland Shaft Coupling Coupler 15mm Outside Diameter

Ruland Shaft Coupling 25mm Bore, 75mm Length Coupler

Ruland Shaft Coupling 20mm Bore, 65mm Length Coupler

Ruland Shaft Coupling 8mm Bore, 35mm Length Coupler

Ruland Shaft Coupling 40mm Bore, 108mm Length Coupler

Buy from our selection of Rigid Couplings from Ruland. At RS, we strive to give you the best offers from our supplier and to promptly deliver in the shortest time.

Ruland Rigid Couplings

Related links