Ceiling Lights

A ceiling light is an electrical fitting containing a lamp or light bulb to provide an artificial light source in a room. Ensuring a workplace has adequate illumination is essential for employee health and safety. Substandard or insufficient lighting can lead to various complaints including eye-strain, headaches and fatigue. On the opposite end of the scale, too much light can also cause the same problems. Both can result in quality issues, low productivity and sometimes accidents can occur.


What ceiling light is best for me?


There are various types of ceiling fixture available, choosing the best one for an installation depends on a few key factors.


  • Natural light: Make the best use of existing natural light. Ensure that all windows and skylights are kept clean to allow as much natural light is utilised.

  • Application: Make sure that the correct type of ceiling lighting is installed for the job at hand. An office environment requires different lighting to a clothing factory containing sewing machines and fabric matching tables.

  • Positioning: Care must be taken when installing ceiling lighting. The correct positioning of lighting ensures that employees can safely carry out their daily tasks and not put themselves under any unnecessary strains.

  • Environment: Must ceiling light be Anti-corrosive or IP44 rated or above.

Whether you are installing office lighting, garage lighting, LED or fluorescent, industrial ceiling lights are the most likely. Some additional points to consider are;


Mounting type


  • Recessed or flush ceiling light: Enables the lamp to be mounted flush into the ceiling.

  • Surface mount: A simple way of fixing single or twin batten fluorescent or LED fixtures to the ceiling.

  • Pendant: A type of fitting that suspends the lamp a short distance from the ceiling.

  • Dimmable: Must the lighting be dimmable? If so extra ballasts and switching components must be used.

  • Diffusers: Used to spread and soften the light.

Colour Temperature


Colour temperature refers to a scale that measures the type of colour or hue that a lamp emits. The colour temperature scale is measured in Kelvins (K). The higher the K number the cooler the lamp. The lower the K number the warmer the lamp.


  • 2500K Extra warm white.

  • 2700K Warm white.

  • 3000K Warm white / White.

  • 3500K White.

  • 4000K Cool white.

  • 6500K Daylight.

...
Read more Read less

Filters

Viewing 1 - 20 of 234 products
Results per page
Description Price PRICED TO CLEAR Type Length Width Depth Wattage Number of Lamps Colour Tone Lamp Type Colour Temperature Lamp Size Life Hours Colour Reference Voltage Rating
RS Stock No. 743-4854
BrandRS PRO
£69.97
Each
Units
- Twin Batten 1.83 m 100 mm 110 mm 2 x 70 W 2 - Fluorescent - T8 - - 230 V
RS Stock No. 795-9791
BrandRS PRO
£171.90
Each
Units
- Twin Batten 1.565 m 140 mm 100 mm 40 W 2 Cool White LED 4500K - - - -
RS Stock No. 362-7901
BrandRS PRO
£193.06
Each
Units
- Single Batten 1.598 m 121 mm 121 mm 58 W 1 - Fluorescent - T8 - - 230 V ac
RS Stock No. 918-1114
BrandRS PRO
£58.27
Each
Units
- Batten 1.527 m 61 mm 64 mm 40 W 1 Cool White LED 4000K T8 - - -
RS Stock No. 795-9788
BrandRS PRO
£113.44
Each
Units
- Twin Batten 1.27 m 140 mm 100 mm 2 x 24 W 2 Cool White LED 4500K - - - -
RS Stock No. 851-2949
BrandRS PRO
£31.95
Each
Units
- Twin Batten 1.51 m 104 mm 75 mm 70 W 2 - Fluorescent - T5 - - 230 V
RS Stock No. 918-1111
BrandRS PRO
£65.85
Each
Units
- Batten 1.791 m 61 mm 64 mm 50 W 1 Cool White LED 4000K T8 - - -
RS Stock No. 851-2933
BrandRS PRO
£19.41
Each
Units
- Twin Batten 610 mm 104 mm 75 mm 28 W 2 - Fluorescent - T5 - - 230 V
RS Stock No. 918-1101
BrandRS PRO
£48.34
Each
Units
- Batten 1.227 m 61 mm 64 mm 30 W 1 Cool White LED 4000K T8 - - -
RS Stock No. 851-3034
BrandRS PRO
£32.54
Each
Units
- Twin Batten 1.475 m 63 mm - 70 W 2 - Fluorescent - T5 - - 230 V
RS Stock No. 875-0198
BrandRS PRO
£0.425
Each (In a Pack of 20)
Units
- Stainless Steel Clip - - - - - - - - - - - -
RS Stock No. 712-7004
BrandRS PRO
£51.56
Each
Units
- Twin Batten 1.56 m 95 mm 100 mm 2 x 58 W 2 - Fluorescent - T8 - - 110 V
RS Stock No. 405-161
BrandRS PRO
£69.34
Each
Units
- Twin Batten 1.508 m 85 mm 60 mm 35 W 2 - Fluorescent - T5 - - -
RS Stock No. 851-2918
BrandRS PRO
£15.95
Each
Units
- Single Batten 610 mm 65 mm 75 mm 14 W 1 - Fluorescent - T5 - - 230 V
RS Stock No. 795-9785
BrandRS PRO
£90.45
Each
Units
- Single Batten 1.27 m 93 mm 100 mm 1 x 24 W 1 Cool White LED 4500K - - - -
RS Stock No. 851-3002
BrandRS PRO
£13.13
Each
Units
- Single Batten 575 mm 63 mm - 14 W 1 - Fluorescent - T5 - - 230 V
RS Stock No. 851-3028
BrandRS PRO
£18.84
Each
Units
- Twin Batten 574 mm 63 mm - 28 W 2 - Fluorescent - T5 - - 230 V
RS Stock No. 918-1120
BrandRS PRO
£93.81
Each
Units
- Batten 1.791 m 61 mm 64 mm 75 W 1 Cool White LED 4000K T12 - - -
RS Stock No. 743-4845
BrandRS PRO
£49.11
Each
Units
- Single Batten 1.874 m 100 mm 100 mm 1 x 70 W 1 - - - T8 - - 230 V
RS Stock No. 851-2902
BrandRS PRO
£104.94
Each
Units
- Diffuser, Recessed 595 mm 595 mm 45 mm 42 W 4 Cool White LED 4000K - - - -
Related Products
These Thorlux Lighting T5 Fluorescent battens are a ...
Description:
These Thorlux Lighting T5 Fluorescent battens are a high quality British made product. These High efficiency battens are built in ultra slim profile with steel end caps and body finished in Non Yellowing white. High frequency ballast to minimise running costs and provide flicker free operationUltra slim profile with steel ...
The introduction of this LED panel is part ...
Description:
The introduction of this LED panel is part of the Ledvance luminaire family providing greater efficiency through integrated LED lighting. The LED panel is the ideal upgrade of existing fluorescent installations. Greater energy savings and low maintenance costs with an average life up to 50000 hours. The illumination of the ...
This RS Pro twin LED 230 V batten ...
Description:
This RS Pro twin LED 230 V batten is a great replacement for traditional T8 battens, which brings energy savings through lower power consumption. Maintenance of these LED battens is also reduced due to high lifetime hours of 30000. Led lamp technology allows instant light at a colour temperature of ...
The Knightsbridge MRBLED features a 40W LED recessed ...
Description:
The Knightsbridge MRBLED features a 40W LED recessed modular light source is the ideal alternative to 4 x 18W modular fittings. The LED lighting technology is an energy efficient replacement with an A+ rating compared to traditional modular fittings. Virtually maintanance free with instant ignition and up 30000 lifetime hours. ...