Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 1 - 20 of 114 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Power Rating Priced to Clear Series Voltage Rating
RS Stock No. 589-783
BrandRS PRO
£1.006
Each (In a Pack of 5)
Units
Panel Mount - BA9 - 17.7mm 19 mm - 14.5mm - Panel Mount - - PE12 150 V
RS Stock No. 589-777
BrandRS PRO
£0.826
Each (In a Pack of 5)
Units
Panel Mount - E10 - 17.7mm 13.25 mm - 14.5mm - Panel Mount - - PE12 150 V
RS Stock No. 206-536
BrandRS PRO
£0.328
Each (In a Pack of 5)
Units
- LED BA9s, E10 - 10mm 42 mm 10 mm - - - - - - -
RS Stock No. 811-642
BrandRS PRO
£0.54
Each (In a Pack of 5)
Units
PCB Mount - Wedge PCB Pin 10mm 14.5 mm T3 1/4 - - - - - - -
RS Stock No. 438-9515
BrandRS PRO
£3.46
Each
Units
- - BA9 Solder Tag 10.3mm 20 mm - - - - - - - -
RS Stock No. 811-715
BrandRS PRO
£0.788
Each (In a Pack of 5)
Units
PCB Mount - Wedge Solder Tag 5mm 14 mm T1 - 1.5mm - - - - -
RS Stock No. 210-793
BrandRS PRO
£0.24
Each (In a Pack of 5)
Units
- LED - - 11mm 21 mm - - - - - - - -
RS Stock No. 811-664
BrandRS PRO
£0.64
Each (In a Pack of 5)
Units
PCB Mount - Wedge - - 12 mm - - - - - - - -
RS Stock No. 237-0496
Mfr. Part No.A104800AAB
£1.50
Each
Units
Panel Mount LED Screw In Wire Leads 9.5mm 14.5 mm 5 mm 8mm 6.3mm - - - - -
RS Stock No. 561-707
Mfr. Part No.TMU/240/4
BrandTranilamp
£10.55
Each
Units
Panel Mount - Screw In Cable Clamp 35mm 62 mm - - - Panel Mount - - TMU -
RS Stock No. 585-898
Mfr. Part No.MTMU/240/4
BrandTranilamp
£18.48
Each
Units
Panel Mount - E10 Cable Clamp 35mm 67 mm - - - Panel Mount - - MTMU 240 V
RS Stock No. 387-5396
Mfr. Part No.DTMU/MES/4
BrandTranilamp
£5.02
Each
Units
Panel Mount - E10 Cable Clamp 35mm 50 mm - - - Panel Mount - - DTMU -
RS Stock No. 171-2580
Mfr. Part No.OR1204
BrandOrbitec
£0.458
Each (In a Pack of 10)
Units
PCB Mount - E10 PCB Pin - - - - - PCB Mount - - 0666 -
RS Stock No. 565-153
Mfr. Part No.T0063AOFAA
£2.84
Each
Units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - - -
RS Stock No. 237-0525
Mfr. Part No.A1048OAAAC
£1.52
Each
Units
Panel Mount LED Screw In Wire Leads 9.5mm 15.5 mm 5 mm 8mm 5.5mm - - - - -
RS Stock No. 237-0519
Mfr. Part No.A104800AAC
£1.74
Each
Units
Panel Mount LED Screw In Wire Leads 9.5mm 14.5 mm 5 mm 8 5.5mm - - - - -
RS Stock No. 171-2603
Mfr. Part No.OR1208
BrandOrbitec
£18.88
1 Box of 10
Box(es)
- - E10 - - - - - - Screw Mount - - 0668 -
RS Stock No. 387-5380
Mfr. Part No.LMU/MES/4
BrandTranilamp
£3.46
Each
Units
Panel Mount - E10 Cable Clamp 35mm 42 mm - - - Panel Mount - - LMU -
RS Stock No. 237-0474
Mfr. Part No.A104700AAA
£1.90
Each
Units
Panel Mount LED - Wire Leads 7.6mm 13.9 mm 3 mm 6.3mm 6.3mm - - - - -
RS Stock No. 171-2596
Mfr. Part No.OR1206
BrandOrbitec
£0.601
Each (In a Pack of 10)
Units
PCB Mount - BA9s PCB Pin - - - - - PCB Mount - - 0664 -
Related Products
A range of lamp holders and sockets from ...
Description:
A range of lamp holders and sockets from JKL Components, designed for automotive-type LED lamps. They are suitable for use in replacement LED lamp applications. This range of sockets include; wedge based, bi-pin, G-4 and screw based. Available in PCB through-hole or wire mounted options, there are a various sockets ...
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully insulated from the panel.
The nickel plated brass body is supplied with ...
Description:
The nickel plated brass body is supplied with an insulation washer, solder tag, fixing nut and washer. Electrical connections are made via the solder tag and body return.,The caps incorporate a nickel plated brass screw with polycarbonate fresnel lens. The lens has a flat top with fully visible sides.,Either a ...
Panel mounting LED holders for two lead 3mm ...
Description:
Panel mounting LED holders for two lead 3mm and 5mm LEDs. These brass LED holders have a chrome, black or white anodised finish. LEDs are held in place by a push-fit nylon base for 3mm types or a screw-in nylon base for 5mm types. The 5mm focussing reflector types have ...