Extractor Fans

Extractor fans also known as wall fans are designed to remove moisture, fumes and unwanted odours from the air to improve the air quality. In domestic and commercial properties it is important to reduce condensation and provide ventilation in the kitchen, bathroom, shower room, wet room and laundry room. Nowadays it is a legal requirement to have an extractor fan in new builds.


The airflow of a fan is in cubic feet per hour (m³/h) and is an important factor when deciding on which type of fan you require. A large variety of wall fans is available in a range of styles and colours to suit all room sizes and locations. Some of these ventilation fans can be very nosy therefore silent extractor fans are worth considering if noise is an issue. Most fans come with a mounting kit, pull cord or automatic shutter options and some have special features such as humidistat, timers and remote controls


Basic types of fans for extraction, intake and ventilation are:


  • Axial fans – most common type, usually wall mounted to internal walls and depending on the cavity depth these wall mounted fans require ducting to reach the exterior wall

  • Centrifugal extractor fans - which are ceiling mounted. General found in commercial and industrial environments that need elongated ducting and can be nosy

  • Inline extractor fan – can be axial or centrifugal but they are not installed on walls and ceilings but found in the loft space above a ceiling

Where to place fans?


  • Kitchen – removes cooking smells, steam and traps grease therefore providing healthier environment

  • Bathroom – to provide ventilation and reduce condensation from the steam after a hot shower or bath. This prevents damp and mouldy patches which can cause health problems as unventilated conditions are ideal for bacteria to live. Also removes unwanted bad smells after using the toilet

  • Shower rooms or wet rooms – bathroom ceiling extractor fans remove moisture from showering

  • Window – some window fans can be mounted on the window but a special kit is required for these window vents

...
Read more Read less

Filters

Viewing 1 - 20 of 56 products
Results per page
Description Price Function Air Flow Noise Level Mounting Face Diameter Face Dimensions Depth Face Height Face Width Configuration Series Special Features Termination Type
RS Stock No. 811-7266
Mfr. Part No.90841AW
BrandXpelair
£24.96
Each
Units
Extraction 76m³/h 35dB(A) Wall Mounted - 165 x 155mm 43mm 155mm 165mm - - - -
RS Stock No. 272-968
Mfr. Part No.VA150P
BrandVent-Axia
£121.86
Each
Units
Extraction 220m³/h 37dB(A) Window Mounted - 216 x 224mm 130mm 216mm 224mm - - - -
RS Stock No. 811-7279
Mfr. Part No.90839AW
BrandXpelair
£21.40
Each
Units
Extraction 76m³/h 35dB(A) Wall Mounted - 165 x 155mm 43mm 155mm 165mm - - - -
RS Stock No. 829-8858
Mfr. Part No.92966RS
BrandXpelair
£76.73
Each
Units
Extraction 54 m³/h, 76 m³/h 15 dB(A), 29 dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted - 180 x 180mm 131mm 180mm 180mm Square Simply Silent Intermittent with Humidistat and Timer -
RS Stock No. 884-0966
Mfr. Part No.Silhouette 100B
BrandVent-Axia
£49.43
Each
Units
Extraction 75m³/h 38dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted 115mm 160 x 160mm 97mm 160mm 160mm Rectangular Silhouette Backdraught Shutter, Safety Extra Low Voltage Design, Unobtrusive Installation Screw
RS Stock No. 200-0901
Mfr. Part No.GX6
BrandXpelair
£99.69
Each
Units
Extraction 266m³/h 37dB(A) Window Mounted - 226 x 210mm 112mm 226mm 210mm - - - -
RS Stock No. 272-160
Mfr. Part No.TX6WL
BrandVent-Axia
£335.16
Each
Units
Extraction, Intake 395m³/h 43dB(A) Wall Mounted - 303 x 310mm 315mm 303mm 310mm Square - - -
RS Stock No. 238-9002
Mfr. Part No.GX12
BrandXpelair
£388.31
Each
Units
Extraction, Intake 1002 m³/h, 1614 m³/h 55dB(A) Window Mounted - 408 x 380mm 161mm 408mm 380mm - GX12 - -
RS Stock No. 272-659
Mfr. Part No.VA150
BrandVent-Axia
£180.41
Each
Units
Extraction 220m³/h 37dB(A) Window Mounted - 216 x 224mm 130mm 216mm 224mm - - - -
RS Stock No. 884-0960
Mfr. Part No.Silhouette 100T
BrandVent-Axia
£84.43
Each
Units
Extraction 75m³/h 38dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted 115mm 160 x 160mm 97mm 160mm 160mm Rectangular Silhouette Backdraught Shutter, Safety Extra Low Voltage Design, Unobtrusive Installation Screw
RS Stock No. 182-7907
Mfr. Part No.GX9
BrandXpelair
£190.58
Each
Units
Extraction, Intake 670m³/h - Window Mounted - 311 x 290mm 110mm 311mm 290mm - GX9 - -
RS Stock No. 221-5591
Mfr. Part No.89996AW
BrandXpelair
£377.90
Each
Units
Extraction, Intake 547 m³/h, 843 m³/h 50dB(A) Wall Mounted - 433 x 409mm 120mm 433mm 409mm - - - -
RS Stock No. 884-0963
Mfr. Part No.VASF100T
BrandVent-Axia
£79.66
Each
Units
Ventilation - 26dB(A) Wall Mounted, Window Mounted 100mm 159 x 159mm 117mm 159mm 159mm Rectangular VASF100 Backdraught Shutters, High Efficiency Motor, Stylish Discrete Design -
RS Stock No. 272-176
Mfr. Part No.TX9WL
BrandVent-Axia
£556.86
Each
Units
Extraction, Intake 870m³/h 43dB(A) Wall Mounted - 388 x 391mm 315mm 388mm 391mm Square - - -
RS Stock No. 272-772
Mfr. Part No.TX12WL
BrandVent-Axia
£781.84
Each
Units
Extraction, Intake 1745m³/h 49dB(A) Wall Mounted - 467 x 470mm 315mm 467mm 470mm Square - - -
RS Stock No. 221-5608
Mfr. Part No.WX12
BrandXpelair
£462.50
Each
Units
Extraction, Intake 1060 m³/h, 1670 m³/h 53.5dB(A) Wall Mounted - 476 x 473mm 167mm 476mm 473mm - - - -
RS Stock No. 200-0894
Mfr. Part No.90865AW
BrandXpelair
£174.10
Each
Units
Extraction 250m³/h - Wall Mounted - 321 x 290mm - 321mm 290mm - - - -
RS Stock No. 272-182
Mfr. Part No.S6WW
BrandVent-Axia
£338.12
Each
Units
Extraction, Intake 285m³/h 35dB(A) Window Mounted 216mm - 233mm - - Round - - -
RS Stock No. 884-0954
Mfr. Part No.VASF100B
BrandVent-Axia
£63.57
Each
Units
Ventilation - 26dB(A) Wall Mounted, Window Mounted 100mm 159 x 159mm 117mm 159mm 159mm Rectangular VASF100 Backdraught Shutters, High Efficiency Motor, Stylish Discrete Design -
RS Stock No. 921-1672
Mfr. Part No.Lo-Carbon Svara
BrandVent-Axia
£131.87
Each
Units
Extraction - 17 → 20dB(A) Wall Mounted, Window Mounted 177mm - 81mm - - Round - 3 Speed, Bluetooth Control, Continuous or Intermittent, Humidistat and Timer, IP44 -
Related Products
Vent Axia ACM in-line mixed flow duct fans ...
Description:
Vent Axia ACM in-line mixed flow duct fans specifically designed for rigid and flexible ducting offering 2 times the pressure development of conventional axial fans. Designed and manufactured in the UKSupplied complete for installationCan operate in both horizontal and vertical orientationsCapacitor start and runSingle direction two speed selectable motor, thermal ...
High performance extract/intake fans for use in single ...
Description:
High performance extract/intake fans for use in single and double glazing, and most types of materials up to 32mm thick. A unique speed control pack enables high, medium or low speeds to be preset to suit room size or specific requirements. Can be mounted at any angleLow density 5 blade ...
Round, easy to install, intake/extract fans with a ...
Description:
Round, easy to install, intake/extract fans with a spigot and ring fixing method which provides a watertight joint with most types of glazing. Thermal overload protected motor which will run at any angleLow noise, low density, 5 blade impellerOperating temperature range -40 to +50°CMade from weather resistant polymeric materialsAutomatic time ...
A single speed, Class III extract fan supplied ...
Description:
A single speed, Class III extract fan supplied with a 230V to 12V transformer which can be mounted safely away out of reach. Overrun timer adjustable up to 20 minutesMotor lubricated for life with thermal cut-outOn-site warranty230 Vac mains powered.