Bolted Tag Fuses

Bolted tag fuses are a cylindrical type of fuse fitted with brackets at either end to bolt it onto a fuse holder. Fuses are devices designed for use in circuit protection. They provide a weak link, meaning that they break when a fault such as an overcurrent or short circuit is detected, as the metal strip within them heats up and then melts. This stops the flow of current, preventing the circuit from further damage.

What are bolted tag fuses used for?

Bolted tag fuses can be used in many general industrial applications, such as in different types of electrical equipment and wiring systems used throughout buildings. They are often used in low voltage circuits. They also work well in high-density mounting applications.

Types of bolted tag fuses

Bolted tag fuses mainly vary by their size and current rating, and these factors can differ quite widely. They can also differ by the fuse speed, voltage rating and their tag orientation.


...
Read more Read less

Filters

Viewing 641 - 649 of 649 products
Results per page
Description Price Current Rating Fuse Size Voltage Rating Fuse Standard Fixing Centres Application Category Tag Width Fuse Speed High Rupture Capacity Overall Length Body Diameter Body Length Body Width Body Height
RS Stock No. 181-8455
Mfr. Part No.TKM250
£125.61
Each
Units
250A - 460 V dc, 660 → 690 V ac BS88, IEC 60269 133mm gG 2mm - - 160.2mm 52.6mm 77mm - -
RS Stock No. 178-1023
Mfr. Part No.H226281
BrandMersen
£3.503
Each (In a Pack of 10)
Units
32M50 A2 250 V dc, 415 V ac BS 88, IEC 60269 73mm gM 9.2mm - No 86mm 21.9mm - - 56.5mm
RS Stock No. 181-8556
Mfr. Part No.10D27
£48.04
1 Box of 25
Box(es)
10A DII 500V ac IEC 60269, VDE 0636 - gG - T - - 21.5mm 50mm - -
RS Stock No. 178-1131
Mfr. Part No.A1006618
BrandMersen
£19.069
Each (In a Pack of 10)
Units
100A B1 460 V dc, 690 V ac - 111mm gG 19.5mm - No 137mm 26.9mm - - 57mm
RS Stock No. 178-1145
Mfr. Part No.S1006634
BrandMersen
£64.88
Each
Units
355A C1 460 V dc, 690 V ac BS 88, IEC 60269 133mm gG 26mm - No 212mm 59.1mm - - 75mm
RS Stock No. 181-8789
Mfr. Part No.STD2
£4.75
Each
Units
2A - 240V ac BS88, IEC 60269 35mm gG 11mm - - 47mm 12mm 24mm - -
RS Stock No. 182-1575
Mfr. Part No.180LET
£16.51
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 178-1022
Mfr. Part No.G226280
BrandMersen
£3.478
Each (In a Pack of 10)
Units
32M40A A2 250 V dc, 415 V ac BS 88, IEC 60269 73mm gM 9.2mm - No 86mm 21.9mm - - 56.5mm
RS Stock No. 181-8494
Mfr. Part No.BAO35
£201.35
1 Box of 20
Box(es)
35A A3 550V ac BS88, IEC 60269 73mm gG - - - 87mm 21mm - - -
Related Products
As the fuse allows for the starting surge ...
Description:
As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A. Breaking capacity 80kA ac 40k AdcRated up to 550Vac/ 250Vdc (Type A1) ...
Eaton Bussmann Series bolted tag fuse is essentially ...
Description:
Eaton Bussmann Series bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such ...
These fuses are designed for : “General purpose ...
Description:
These fuses are designed for : “General purpose use” protection (gG type) or motor protection (gM type). This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by other fuses of higher rating in their range. They are ...
Eaton’s Bussmann® series H07-660 fuse links are specifically ...
Description:
Eaton’s Bussmann® series H07-660 fuse links are specifically designed for the protection of large industrial installations up to 690 V a.c. Good peak let-through current limitation1:1:6 Selective coordination ratio between “minor” and “major” fusegG characteristics for cable protection and general purpose applications.