SMD Soldering Exercise Boards

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Number of Sides Dimensions Length Number of SMD Components Width Circuit Pattern Base Material Copper Thickness FR Material Grade SMD Component Type Thickness
RS Stock No. 528-0396
Mfr. Part No.RE711001-LF
£12.77
Each
Units
1 100 x 140 x 1.5mm 100mm 57 140mm - Epoxy Glass Fabric Laminate 35µm FR4 Multiple Types 1.5mm
RS Stock No. 528-0403
Mfr. Part No.RE712001-LF
£12.77
Each
Units
1 100 x 140 x 1.5mm 100mm 85 140mm - Epoxy Glass Fabric Laminate 35µm FR4 Multiple Types 1.5mm
RS Stock No. 178-3497
Mfr. Part No.RE716001-LF
£7.10
Each
Units
2 213 x 72 x 1.5mm 213mm 11 72mm Two Side Epoxy Glass Fabric Laminate 35µm FR4 Multiple Types 1.5mm
Related Products
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. 35 μm CU on one side HAL hot dip tin-plated Hole pattern: 2.54 mm 37 x 58 holes Soldering islands 2.2 mm Hole diameter: 1 mm Size: 100 x 160 mm DIN 41612 (31 pin) connector. RE120-LF Prototype Board. DIN Type ...
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. 35 μm CU on one side HAL hot dip tin-plated CEM3 base material Hole diameter: 1 mm Connected in 3 hole pattern. RE310 Prototype Board, 3 Hole Pads. DIN Type Matrixboard.
These double-sided epoxy FR4 pads are fully plated ...
Description:
These double-sided epoxy FR4 pads are fully plated with 2 mm2 tinned pads with a drilling diameter of 1 mm and connector DIN 41612. The other side is fully copper-clad for shielding. High Frequency Shielding Pads. DIN Type Matrixboard.
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Prototyping board SMDEpoxy fibre-glass 1.50 mm Single-sided 35 μm Cu Hot air leveling (HAL-Leadfree)Solder stop mask Hole spacing 1,27 x 1,27 mm. Prototyping Boards, 1.27 mm Pitch. DIN Type Matrixboard.