Disc Latches

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Minimum Grip Range Maximum Grip Range Lockable Material
RS Stock No. 348-7185
£5.78
Each
Units
22mm 30mm Yes Steel
RS Stock No. 348-7163
£5.08
Each
Units
10mm 18mm Yes Steel
RS Stock No. 348-7179
£5.46
Each
Units
17mm 25mm Yes Steel
Related Products
Silver powder coated mild steel case with satin ...
Description:
Silver powder coated mild steel case with satin nickel plated die cast zinc bolt and latchSatin finish, stainless steel forend and strike Designed to match the dimensional characteristics of DIN 18251 with follower to cylinder centres at 72mm. Case pierced to accept bolt through fixings at 38-41mm centres at the ...
Miniature, fully enclosed latch with a spring mechanism ...
Description:
Miniature, fully enclosed latch with a spring mechanism which gives a wide positioning tolerance. Concealed catch plate with assembly rivetsCompression springs made in stainless steel 18//8Weld or M3 screw fixing15kgf operating tensionLatch to catch distance 25.5mm.
Suitable for screw fixing (M4 screws). Two adjustable ...
Description:
Suitable for screw fixing (M4 screws). Two adjustable latches (range 6.0mm) with manual safety lockIn the open position the latch lies flat to minimise accidental damage Maximum operating tension of 300kgf The manual safety button has to be pulled back at the same time as the lever is lifted for ...
A robust, general purpose latch with a 4mm ...
Description:
A robust, general purpose latch with a 4mm wire link and the facility to padlock secure. Normal latch to catch fixing centre is 63.3mm (max.) giving a 70kgf max operating tensionSuitable for screw fixing using 2xM4 screws for latch and 2xM5 screws for catch.