LED Driver Accessories

LED driver accessories are additional products used in conjunction with LED drivers (power regulators) during the installation and operation of LED lighting fixtures.

Examples of LED driver accessories include dimmers, repeaters, power supplies, bridges, resistors, splitters and clamps to name but a few.

What are LED driver accessories used for?

LED driver accessories are used to assist with continuous power regulation (current flow) from the LED driver to the LED strings (multiple lights on an insulated wire).

They are also used in conjunction with LED drivers in residential and office lighting applications.

Types of LED driver accessories

  • Dimmer components or DMX controllers regulate dim levels, colours and show intensities.
  • Bridging products translate analogue dimmer signals to DMX compatible control signals.
  • Faceplate panels are the covers that fit over the LED driver component. These plates can be mounted to walls and ceilings.
  • Driver boxes are the enclosures surrounding the drivers and used to shield the LED drivers against mechanical and environmental hazards.
  • Repeaters are used to control multiple LED strips in conjunction with the LED controllers.

...
Read more Read less

Filters

Viewing 21 - 28 of 28 products
Results per page
Description Price Accessory Type For Use With Series
RS Stock No. 146-6724
Mfr. Part No.28001114
BrandTridonic
£0.389
Each (In a Bag of 10)
Units
Current Resistor I-SELECT 2 LED Drivers I-SELECT 2
RS Stock No. 146-6729
Mfr. Part No.28001168
BrandTridonic
£1.225
Each (In a Bag of 10)
Units
Strain Relief Kit Call II LED Drivers ACU SC
RS Stock No. 146-6722
Mfr. Part No.28001110
BrandTridonic
£0.551
Each (In a Bag of 10)
Units
Current Resistor I-SELECT 2 LED Drivers I-SELECT 2
RS Stock No. 146-6725
Mfr. Part No.28001118
BrandTridonic
£0.551
Each (In a Bag of 10)
Units
Current Resistor I-SELECT 2 LED Drivers I-SELECT 2
RS Stock No. 179-3036
Mfr. Part No.RGBRP-RF
BrandPowerLED
£20.83
Each
Units
RGB Power Repeater RGB18 RGB-RP
RS Stock No. 146-6727
Mfr. Part No.28001125
BrandTridonic
£0.389
Each (In a Bag of 10)
Units
Current Resistor I-SELECT 2 LED Drivers I-SELECT 2
RS Stock No. 146-6723
Mfr. Part No.28001112
BrandTridonic
£0.389
Each (In a Bag of 10)
Units
Current Resistor I-SELECT 2 LED Drivers I-SELECT 2
RS Stock No. 146-6726
Mfr. Part No.28001122
BrandTridonic
£0.389
Each (In a Bag of 10)
Units
Current Resistor I-SELECT 2 LED Drivers I-SELECT 2
Related Products
The PhaseCut family of constant current dimmable LED ...
Description:
The PhaseCut family of constant current dimmable LED drivers from Osram are designed for indoor applications. They come in a very compact housing which makes them ideal for applications where space is limited. The PhaseCut CC power supplies are compatible with most leading-edge and trailing-edge phase dimmers.Their PhaseCut functionality, also ...
The Osram OPTOTRONIC series LED driver is a ...
Description:
The Osram OPTOTRONIC series LED driver is a non-dimmable constant voltage driver with a linear area constant current. It gives a high quality of light due to low output ripple current. • High efficiency• Lifetime: up to 100,000h (temperature at T c = 65°C, max. 10% failure rate)• Line frequency ...
Description:
The Osram CV series LED driver has a constant voltage and is suitable for use in tight, flat luminaires and suspended ceilings. • High electronic reversible short circuit, overload, over temperature protection• Independent installation possible• Input voltage is from 198VAC to 264VAC• Installation in very cold and hot environments• Lifetime ...
The Osram OPTOTRONIC series is a dimmable LED ...
Description:
The Osram OPTOTRONIC series is a dimmable LED driver that gives a 24.2V constant voltage. • Dimmable via fully isolated 1V to 10V interface• High electronic reversible short circuit, overload, over-temperature protection• Independent installation possible• Input voltage is from 198VAC to 264VAC• Installation in very cold and hot environments• Lifetime ...