Push Wire Terminals

Push wire terminals, sometimes referred to as grip wire connectors, are used for connecting wires without the need for solderor screws. They are either pushed closed with pliers or by hand, or they contain spring clips that you can operate manually.

You’ll find them an easy-to-use terminal type for connecting various gauges of wire, including solid and stranded wires.

Types of push wire terminals

The two main types are spring-loaded push grip terminals and brass one-way terminals, which need to be closed with pliers.

Push wire terminals come in a range of designs and a variety of sizes for different gauges of wire and different voltage ratings. They can be single or multi-way connectors. Designs range from clear polycarbonate connector housings for easy inspection, with multiple connectors and a voltage testing port, to slim one-way wire connectors for confined spaces.

What are push wire terminals used for?

Push wire terminals are used as splice connectors for electrical installations, such as lightingand wiring systems. This includes retrofitting and repairs, electrical signage and almost anywhere you need to connect light to medium gauge wires together.


...
Read more Read less

Filters

Viewing 21 - 23 of 23 products
Results per page
Description Price Number of Ways Minimum Wire Size mm² Wire Size Cable Strip Length Maximum Wire Size mm² Current Rating Minimum Wire Size AWG Maximum Wire Size AWG Voltage Rating Width Height Depth Colour Maximum Cable Strip Length
RS Stock No. 2508463099
Mfr. Part No.331P
£11.90
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2508978787
Mfr. Part No.K32/C
BrandVector
£23.07
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2508463077
Mfr. Part No.330-P
£10.20
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -
Related Products
PIDG (Pre-Insulated Diamond Grip) Faston 250 quick disconnect ...
Description:
PIDG (Pre-Insulated Diamond Grip) Faston 250 quick disconnect piggyback receptacle wire crimp terminals with a mating area designed for uniform reliability in the most difficult circuit environments. These PIDG piggyback wire terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a ...
DuraSeal crimp ring terminals with an environmentally sealed ...
Description:
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing ...
PIDG insulated PIDG hook tongue wire crimp terminal ...
Description:
PIDG insulated PIDG hook tongue wire crimp terminal consisting of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a copper sleeve and the whole is encased in a nylon colour coded insulation sleeve.
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, ...