Distribution Blocks

The primary function of a distribution block is to supply power more efficiently to a series of devices. The secondary function is to isolate short circuit incidents to prevent complete shutdown from occurring. Distribution blocks can handle a range of frequencies and currents. Using distribution blocks requires only one large wire on the input side to link each connected device back to the power source. This eliminates the need for separate wiring of each device.

What are distribution blocks used for?
Distribution blocks are used in various industries:

  • Heating/cooling for operating heaters, cooling systems and ventilation equipment.
  • Power distribution control in the form of voltage transformers, uninterrupted power supply units and distribution cabinets
  • Solar, wind and turbine as the power supply to distribute energy.
  • Electrical vehicles for charging stations.
  • Electronic automation, including elevators, lifting equipment and conveyor systems.


Types of distribution blocks
The two main types of distribution block are:

  • Bussed (enclosed) blocks, which allow for a larger input cable to be split out into smaller cables for branch circuits.
  • Independent blocks, which enable multiple individual circuits to be routed to a single location as they are not connected to each other.

...
Read more Read less

Filters

Viewing 61 - 73 of 73 products
Results per page
Description Price Number of Ways Termination Method Wire Size Housing Material IP Rating Current Rating Voltage Rating Cable CSA Length Width Height Colour Maximum Operating Temperature Minimum Operating Temperature
New
RS Stock No. 187-9904
Mfr. Part No.3273334
£29.98
1 Bag of 10
Bag(s)
7 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 25.55mm 21.7mm Red - -
RS Stock No. 138-3506
Mfr. Part No.1561820000
BrandWeidmuller
£15.053
Each (In a Pack of 3)
Units
2 (Input), 2 (Output) Screw 8 AWG Wemid - 300 A, 160 (UR) A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Brown +130°C -50°C
RS Stock No. 138-3492
Mfr. Part No.1562100000
BrandWeidmuller
£33.61
1 Pack of 1
Pack(s)
2 (Input), 9 (Output) Screw 4 AWG Wemid - 250 A, 200 (UR) A 1 kV ac, 1.5 kV dc, 600 V 16 mm², 25 mm², 35 mm², 120 mm² 52.5mm 67mm 94mm Grey +130°C -50°C
RS Stock No. 138-3502
Mfr. Part No.1561670000
BrandWeidmuller
£11.146
Each (In a Pack of 5)
Units
2 (Input), 2 (Output) Screw 12 → 2 AWG Wemid - 202 A, 125 (UR) A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Green +130°C -50°C
New
RS Stock No. 187-9903
Mfr. Part No.3273332
£29.98
1 Bag of 10
Bag(s)
7 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 25.55mm 21.7mm Blue - -
RS Stock No. 138-3505
Mfr. Part No.1561780000
BrandWeidmuller
£15.053
Each (In a Pack of 3)
Units
2 (Input), 2 (Output) Screw 8 AWG Wemid - 300 A, 160 (UR) A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Blue +130°C -50°C
RS Stock No. 138-3501
Mfr. Part No.1561650000
BrandWeidmuller
£11.146
Each (In a Pack of 5)
Units
2 (Input), 2 (Output) Screw 12 → 2 AWG Wemid - 202 A, 125 (UR) A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Brown +130°C -50°C
New
RS Stock No. 187-9902
Mfr. Part No.3270223
£50.87
1 Bag of 5
Bag(s)
16 Push In 26 → 14 (Solid, Flexible) AWG Polyamide - 37A 250 V 0.14 → 1.5 (Flexible) mm², 0.14 → 2.5 (Solid) mm² 63.6mm 8.3mm 54mm Blue, Grey - -
RS Stock No. 138-3500
Mfr. Part No.1561640000
BrandWeidmuller
£11.146
Each (In a Pack of 5)
Units
2 (Input), 2 (Output) Screw 12 → 2 AWG Wemid - 202 A, 125 (UR) A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Blue +130°C -50°C
RS Stock No. 2508293499
Mfr. Part No.1413400
£41.36
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 2508426551
Mfr. Part No.38019
BrandAltech
£55.59
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 2508426545
Mfr. Part No.38020
BrandAltech
£53.42
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 2508426539
Mfr. Part No.38032
BrandAltech
£40.23
Each
Units
- - - - - - - - - - - - - -
Related Products
ABB DBL modular distribution terminal blocks for installation ...
Description:
ABB DBL modular distribution terminal blocks for installation on modular blocks. Either plate or DIN rail mounted.
Range of W series (WPD) distribution blocks from ...
Description:
Range of W series (WPD) distribution blocks from Weidmuller. These distribution blocks range from 0.05 mm² to 300 mm² allowing you to have diverse options for your application. The WPD series distribution blocks are housed with Wemid for increased safety and performance. You are able to safely and efficiently distribute ...
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protection.These terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protection.These terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.