IEC Connectors

IEC Connectors are used as power couplers for electrical appliances. IEC refers to the set of standards from the International Electrotechnical Commission, ensuring that the power cords for appliances conform to a standardized set of safety requirements for appliances not exceeding a 250 V ac voltage or 16 A rated current.
For everything to domestic kitchen equipment to computer hardware in office environments, the IEC connector is available in different sizes and shapes to accommodate the current, temperature and earthing requirements of different appliances.

IEC Types:
  • C1/C2- Used for small electrical appliances such as electric trimmers or shavers.
  • C5/C6- Known as a clover leaf, this power connector is used in smaller electrical appliances such as projectors.
  • C7/C8- The figure-eight connector is commonly used in personal stereo systems and some older laptop models.
  • C13/C14- This connector is used for larger electrical appliances, such as kitchen appliances, instrumentation amplifiers and computer hard drives.
  • C15/C16- This connector is often referred to as a kettle lead due to its use in powering electric kettles. They are well suited to this task due to their designation as a ’hot condition’ coupler, and having a high temperature rating
  • C15A/C16A- Is similar to the C15 and C16, but is rated for a higher temperature.
  • C17/C18- Is an unearthed power connector that is used in audio applications when audio quality is a concern.
  • C19/C20- Is a power connector for high current applications, such as uninterruptible power supplies or power distribution units.

...
Read more Read less

Filters

Viewing 1121 - 1121 of 1121 products
Results per page
Description Price IEC Connector Type Mounting Type Gender Current Rating Body Orientation Termination Method Switch Type Number of Fuses Voltage Rating Rewireable Fuse Size Maximum Cable Diameter Shuttered Priced to Clear
RS Stock No. 2508643302
Mfr. Part No.771W-X2/01
£0.53
Each
Units
- - - - - - - - - - - - - -
Related Products
Panel thickness 1.5mm250Vac/ 10A rated, type 250 (0.25mm) ...
Description:
Panel thickness 1.5mm250Vac/ 10A rated, type 250 (0.25mm) blade receptaclesDepth 32.5mmFor suitable insulating boot see stock no.211-0907.
PCB mounting (screw or rivet) suitable for flow ...
Description:
PCB mounting (screw or rivet) suitable for flow wave soldering240Vac/10A rated, compliant to BS 4491Flammability rating UL94V-0Kite mark licence no 6745.
From Schurter, this IEC cord connector is easy ...
Description:
From Schurter, this IEC cord connector is easy to rewire and requires no special tooling. The robust gripped housing ensures a high degree of environmental protection, and the plug mates to IP67 and IP69K, meaning it is waterproof and weatherproof. • IP67/IP69K• Maximum Operating Temperature: +85 C• Cable Diameter: 6.0mm ...
Schaffner IL13 series power cords with IEC locking ...
Description:
Schaffner IL13 series power cords with IEC locking systems guard against accidental disconnection of all electrical appliances with an IEC inlet. No exchange or modification of the IEC inlet or IEC inlet filter system is required, and retrofitting is easy for all electronic equipment and devices. • No accidental disconnection• ...