IEC Connectors

IEC Connectors are used as power couplers for electrical appliances. IEC refers to the set of standards from the International Electrotechnical Commission, ensuring that the power cords for appliances conform to a standardized set of safety requirements for appliances not exceeding a 250 V ac voltage or 16 A rated current.
For everything to domestic kitchen equipment to computer hardware in office environments, the IEC connector is available in different sizes and shapes to accommodate the current, temperature and earthing requirements of different appliances.

IEC Types:
  • C1/C2- Used for small electrical appliances such as electric trimmers or shavers.
  • C5/C6- Known as a clover leaf, this power connector is used in smaller electrical appliances such as projectors.
  • C7/C8- The figure-eight connector is commonly used in personal stereo systems and some older laptop models.
  • C13/C14- This connector is used for larger electrical appliances, such as kitchen appliances, instrumentation amplifiers and computer hard drives.
  • C15/C16- This connector is often referred to as a kettle lead due to its use in powering electric kettles. They are well suited to this task due to their designation as a ’hot condition’ coupler, and having a high temperature rating
  • C15A/C16A- Is similar to the C15 and C16, but is rated for a higher temperature.
  • C17/C18- Is an unearthed power connector that is used in audio applications when audio quality is a concern.
  • C19/C20- Is a power connector for high current applications, such as uninterruptible power supplies or power distribution units.

...
Read more Read less

Filters

Viewing 41 - 60 of 1121 products
Results per page
Description Price IEC Connector Type Mounting Type Gender Current Rating Body Orientation Termination Method Switch Type Number of Fuses Voltage Rating Rewireable Fuse Size Maximum Cable Diameter Shuttered Priced to Clear
RS Stock No. 173-7842
Mfr. Part No.4732.0000
BrandSchurter
£3.267
Each (In a Box of 100)
Units
C14 Cable Mount Male 10A Straight Screw Down - - 250 V ac - - - - -
RS Stock No. 539-2219
Mfr. Part No.4732.0000
BrandSchurter
£5.33
Each
Units
C14 Cable Mount Male 10A Straight Screw Down - - 250 V ac - - - - -
RS Stock No. 195-912
Mfr. Part No.PX0580/63
BrandBulgin
£1.92
Each
Units
C14 Panel Mount Male 10A Straight - - - 250 V ac - - - - -
RS Stock No. 173-7824
Mfr. Part No.4782.0000
BrandSchurter
£2.386
Each (In a Box of 100)
Units
C13 Cable Mount Female 10A Straight Screw Down - - 250 V ac - - - - -
RS Stock No. 539-3559
Mfr. Part No.4782.0000
BrandSchurter
£3.76
Each
Units
C13 Cable Mount Female 10A Straight Screw Down - - 250 V ac - - - - -
RS Stock No. 539-2168
Mfr. Part No.6600.3300
BrandSchurter
£1.67
Each
Units
C13 Panel Mount Female 15A Straight - - - 250 V ac - - - - -
RS Stock No. 173-7831
Mfr. Part No.6600.3300
BrandSchurter
£1.135
Each (In a Box of 50)
Units
C13 Panel Mount Female 15A Straight - - - 250 V ac - - - - -
RS Stock No. 173-7840
Mfr. Part No.6100.3200
BrandSchurter
£0.718
Each (In a Box of 50)
Units
C14 Panel Mount Male 15A Straight - - - 250 V ac - - - - -
RS Stock No. 539-2039
Mfr. Part No.6100.3200
BrandSchurter
£1.04
Each
Units
C14 Panel Mount Male 15A Straight - - - 250 V ac - - - - -
RS Stock No. 489-245
Mfr. Part No.PX0793/63
BrandBulgin
£3.07
Each
Units
C13 Panel Mount Female 10A Straight Solder - - 250 V ac - - - - -
RS Stock No. 489-245A
Mfr. Part No.PX0793/63
BrandBulgin
£2.18
Each (In a Pack of 25)
Units
C13 Panel Mount Female 10A Straight Solder - - 250 V ac - - - - -
RS Stock No. 449-938
Mfr. Part No.PX0686/SE
BrandBulgin
£4.94
Each
Units
C14 Cable Mount Male 10A Right Angle Screw Down - - 250 V ac - - - - -
RS Stock No. 449-938A
Mfr. Part No.PX0686/SE
BrandBulgin
£4.479
Each (In a Pack of 20)
Units
C14 Cable Mount Male 10A Right Angle Screw Down - - 250 V ac - - - - -
RS Stock No. 313-5480
Mfr. Part No.4784.0000
BrandSchurter
£4.24
Each
Units
C15 Cable Mount Female 15A Right Angle - - - 250 V - - - - -
RS Stock No. 173-9882
Mfr. Part No.4784.0000
BrandSchurter
£2.309
Each (In a Box of 100)
Units
C15 Cable Mount Female 15A Right Angle - - - 250 V - - - - -
RS Stock No. 211-0985
Mfr. Part No.BZH01/Z0000/02
BrandBulgin
£4.98
Each
Units
C14 Snap-In - - - - - - - - - - - -
RS Stock No. 426-468
Mfr. Part No.PX0590/63
BrandBulgin
£1.45
Each
Units
C16 Panel Mount Male 10A Straight Solder - - 250 V ac - - - - -
RS Stock No. 352-1825
Mfr. Part No.BVA01/Z0000/11
BrandBulgin
£7.54
Each
Units
C14 Panel Mount - 10A Vertical Tab 2 Pole 5 - - - - - -
RS Stock No. 293-5891
Mfr. Part No.PX0588
BrandBulgin
£3.84
Each
Units
C13 Cable Mount Female 10A Right Angle Screw Down - - 250 V ac - - - - -
RS Stock No. 211-1001
Mfr. Part No.BZH01/Z0000/11
BrandBulgin
£7.37
Each
Units
C14 Snap-In - 10A Horizontal Tab 2 Pole 5 - - - - - -
Related Products
From Schurter, this IEC cord connector is easy ...
Description:
From Schurter, this IEC cord connector is easy to rewire and requires no special tooling. The robust gripped housing ensures a high degree of environmental protection, and the plug mates to IP67 and IP69K, meaning it is waterproof and weatherproof. • IP67/IP69K• Maximum Operating Temperature: +85 C• Cable Diameter: 6.0mm ...
From Bulgin, this re-wireable cable mounting sockets is ...
Description:
From Bulgin, this re-wireable cable mounting sockets is available straight, right angle and bottom entry styles. These sockets have a contact resistance of 10⁴MΩ. Operating temperature is -40°C to +70°C. Max pin temperature 65°C. Kite mark licence no. 6745.
Manufactured in nylon, UL94V-0 rated Panel plug connection ...
Description:
Manufactured in nylon, UL94V-0 rated Panel plug connection by 6.3mm (0.25in) receptacles Cable dia. to fit boot: 7.6mm max. Dimensions (mm) Depth 33, Hole dia 3.5, FC 40Cut out: 27.4x19.8mm radius 5.
A range of Hubbell IEC 320 2 pole ...
Description:
A range of Hubbell IEC 320 2 pole + earth, panel mount inlets and detachable connector bodies with a terminal screw wiring method and a straight body. Example of suitable applications to include cooking equipment, workstations, desktop publishing systems, CAD/CAM systems, medical equipment and industrial lasers as well as others. ...