Fibre Optic Cable

Fibre optic cables are network cables that contain one or more transparent optical fibres that are used to carry light. The optical fibres are typically glass or plastic pipes contained in a protective tube suitable for long distance, very high performance data networking and telecommunications. A key advantage of fibre optic cables over metal conductor cables is superior performance in terms of bandwidth and data carrying performance. Fibre optic cables have revolutionised networking due to their ability to transmit signals extremely fast, have a higher bandwidth and are less susceptible to interference. Fibre optic cables are in internet, phone and TV applications. Theyre also used in decorative lighting, for example you can get fibre optic Christmas trees. Their ability to save space means that they are used in lighting and safety features of cars. They are used in the medical field, mechanical inspections and can be used as fibre optic sensors for electrical currents, sounds and chemicals. How do Fibre Optic Cables Work?Fibre optic cables carry communication signals using pulses of light generated by small lasers or light-emitting diodes (LEDs). The cable consists of one or more strands each approximately the thickness of a human hair. The centre of each strand is called the core, this core is the pathway for light to travel. The core is surrounded by a layer of glass that reflects light inward to avoid loss of signal and allow the light to pass through bends in the cable. Types of Fibre Optic Cable Single-Mode: The simplest form in which all signals travel down the middle of the fibre without reflection. Suitable for data transmission over long distances (>100 km) Multimode: Around 10 times bigger than single-mode fibres, allowing light beams to travel through various paths (or multiple modes). Suitable for data transmission over relatively short distances (≤2 km)Optical fibres are classified according to their modal type and transmission speeds: OM1 – Multimode 62.5/125 μm & OM2 – Multimode 50/125 μm 1 Gbit.Fibre optic cable assemblies consist of a group of fibre optic wires gathered together in a protective casing. Theyre used to transmit data, using total internal refraction of light. The individual strands are often coated with a material such as plastic to prevent the fibre from damage and the assembly may also have a layer of light-absorbing glass between fibres to prevent interference if light leaks from one fibre.

...
Read more Read less

Filters

Viewing 601 - 606 of 606 products
Results per page
Description Price Length Propagation Mode Terminated/Unterminated Connector A Connector B Core Diameter Number of Cores Sheath Colour Cable Construction Priced to Clear
RS Stock No. 179-0055
Mfr. Part No.BF4MC-6GTXRX-B1-55MM
BrandHirose
£74.15
Each
Units
55mm - Terminated BF4MC BF4MC 0.5mm - White - -
RS Stock No. 144-6091
Mfr. Part No.6536967-5
BrandCOMMSCOPE
£80.52
Each
Units
5m Multi Mode Terminated LC SC 50/125µm - Light Blue - -
RS Stock No. 2550219695
Mfr. Part No.TSXSCPCM4030
£121.94
Each
Units
- - - - - - - - - -
RS Stock No. 2508469952
Mfr. Part No.HPF-D002-H
£63.04
Each
Units
- - - - - - - - - -
RS Stock No. 2550226043
Mfr. Part No.TSXSCPCC1030
£121.94
Each
Units
- - - - - - - - - -
RS Stock No. 2550226046
Mfr. Part No.TSXSCPCU4030
£121.94
Each
Units
- - - - - - - - - -
Related Products
The single loose tube STA fibre optic cable ...
Description:
The single loose tube STA fibre optic cable is designed for internal and external duct and burial applications. You can also use these with environments requiring impact protection. Campus environments intra buildings can also use this cable. • Colour coded fibres • High impact CST (Corrugated Steel Tape) armouring • ...
954 1D5D 05,0 954 1D0 | Amphenol Single ...
Description:
954 1D5D 05,0 954 1D0 | Amphenol Single Mode Fibre Optic Cable 5m
Low-Smoke, Zero-Halogen cable jacket Immune to electrical interference ...
Description:
Low-Smoke, Zero-Halogen cable jacket Immune to electrical interference Backed by Star Tech.com lifetime warranty ApplicationsDesigned for use with Fast Ethernet networks Connect between computers, hubs, switches, print servers and patch panels Connect a workstation to an RJ45 wall outlet Extend the reach of your Ethernet network devices by 30 ft. ...
Cables with single-mode fibre 9 / 125 μm, ...
Description:
Cables with single-mode fibre 9 / 125 μm, cabled 2.8 mm.Fitted with SC or FC with APC polishing (oblique), to reduce reflection.Individually tested by the manufacturer.