Category 7 cable, more commonly known as a Cat7 or Cat-7 cable, is used for the cabling infrastructure of Gigabit Ethernet. Cat7 cable was developed with strict specifications on crosstalk and EMI protection. For more about its key features and applications, please see our complete guide to Cat7 cable.
Uses The cable features four individually shielded pairs as well as an overall cable shield to protect the signals from crosstalk and EMI. Cat7 cables are designed for use in Industrial Ethernet networks, designed to withstand the entire spectrum of environmental and mechanical hazards, from temperature extremes and sunlight to solvents, oils, chemicals and moisture.
Support Cat7 can support 10 Gbps, but laboratory tests have successfully shown its ability to transmit up to 40 Gbps at 50 meters and even 100 Gbps at 15 meters. The cabling can support frequencies of up to 600 MHz.
Connectors Cat7 cable is commonly terminated using a GG45 connector, which is backwards compatible with the RJ45 connectors (8p8c) used on Cat6 or Cat5e cable.
GG45: The GG45 connector has four additional conductors that provide support for frequencies of up to 600 MHz.
TERA: Cat7 cable may also be terminated using TERA connectors, which have a unique footprint and is not compatible with a standard RJ45 (8p8c) connector. The TERA connector is also capable of supporting frequencies of up to 600 MHz.
Description:
Molex category 5E 4 Pair U/UTP cable, has
been designed to support 100 MHz up to 1 Gb/s transmission systems over 100 m. This cable is part of the Power Cat System range of products, that have been designed based on the Power Sum principle of crosstalk measurement and testing. ...
Description:
RJ45 connector-clip protectors eliminate cable snags and breaks
during installation Purple PVC jacket for colour coding your connections10 meters in length for longer connections Moulded RJ45 connectors prevent cable damage and also provide strain relief50-micron gold-plated connectors for a clear signal High-quality 24 AWG copper wire ApplicationsAdd data redundancy to ...
Description:
4-pair, 24awg solid bare copper conductor insulated with
polyolefin Exceeds the performance requirements of ISO 11801, EN 50173 and TIA/EIA 568A. It offers a guaranteed performance of 155MHz with a nominal performance of up to 350MHz. There is also an extra margin ACR available to ensure reliable operation of high ...
Description:
Category 7 100 Ω S/FTP cable.Shielded cable assembled
in pairs and with braid used in both horizontal and vertical configurations.It forms the basis for very high-speed VDI (Voice - Data - Image) networks and offers excellent EMC immunity.Low smoke and no halogen.
