Conduit trunking cable acts as the current transmitter within a structure, and is located inside a steel or PVC enclosure called a conduit. Trunking made of galvanised steel or zinc is used around the cables for protection.
What is conduit trunking cable used for?
Conduit trunking cable is used as a safety measure in hazardous areas where fire, smoke, chemical gas or electrical shortages may damage equipment or machinery.
In an industrial or factory setting, the cable is installed in closed systems or fixed installation circuits. It can also be connected to light fittings and used inside appliances.
Types of conduit trunking cable
Conduit trunking cable come in various specifications, dependent on the conduit material:
PVC, for where cables are installed in wet locations or underground
EMC, for applications in building walls that require lightweight and flexible cable
Flexible metal, for attic vents or water heaters requiring flexible cable
IMC, for use in outdoor applications prone to impact from wind or rain
Rigid metal, for piping under driveways or service feeder installations
Description:
Fine strand coiled cord from the H07RN-F range,
with earth conductor. Suited for use with work that involves strong chemicals, extreme temperatures and heavy duty mechanics. These cords can often be referred to as "Curly Cord". Length of extended ends: 500 mm each Very resistant to aging and weathering Temperature ...
Description:
H07V-U rigid wires are used for domestic circuits
in conduits or tubing, or for wiring and cabling electrical device panels.These wires are commonly used to obtain better contact and greater resistance to vibration.They are round and heavy, and have class 1 flexibility.
Description:
The range of RS Pro H07V-R PVC insulated
conduit cables are suitable for power and lighting circuits and building wiring. The class 2 flexible cables are intended for use in semi-flush exposed conduits and embedded conduits and in closed installation ducts. They are also ideal for the internal wiring of ...
Description:
These cables are intended for installation in surface
mounted or embedded conduits, or similar closed systems. These cables are suitable for use in channels with cover. Suitable for fixed protected installation in or on light fittings and inside applications, switchgear and controlgear, for voltages up to 750V a.c or up ...
