Battery pack chargers are modules used to replenish electrical energy in batteries, by pushing an electrical current through them. They can only be used with rechargeable (second cell) batteries, as these are the only type of re-usable battery, and may be fixed via mounting bracketsto a wall or surface, or used loose.
How do battery pack chargers work?
Battery pack chargers force an electrical current through a depleted cell, to replace the energy it has lost. They can work in a number of different ways.
simple chargers push a constant current into the battery, not adjusting when the energy is restored
trickle chargers continue to replenish the energy of the battery at a low rate when it is fully charged
timer based chargers switch off after a given time limit, to preserve the battery
Types of battery pack chargers
Battery pack chargers very mainly in the types of battery they fit. Different batteries have different chemical make-ups, so you will have to choose a charger that is suitable to use with your batteries, whether lithium, NiCd, or NiMH, for example. Some battery chargers are able to charge more than one cell at a time.
Description:
Cut-out power supply charger for Li-Ion batteries.3 charge
control stages. Automatic detection of completed charge. Protected against current overloads and polarity reversal.Includes EU, UK, US & AUS input plugs plus 2.1mm & 2.5mm output plugsApproved for medical devices: EN 60601.
Description:
Cut-out power supply charger for Li-Ion batteries.3 charge
control stages. Automatic detection of completed charge. Protected against current overloads and polarity reversal.Includes EU, UK, US & AUS input plugs plus 2.1mm & 2.5mm output plugsApproved for medical devices: EN 60601.
Description:
Cut-out power supply charger for Li-Ion batteries.3 charge
control stages. Automatic detection of completed charge. Protected against current overloads and polarity reversal.Includes EU, UK, US & AUS input plugs plus 2.1mm & 2.5mm output plugsApproved for medical devices: EN 60601.
Description:
3 stage charge control with current detection as
charge terminationMedical approved (EN 60601)Universal input voltage (90-264Vac)2-pin IEC 320 input connection2.1x5.5x12mm output connector (mating connector 656-3901 for 2.1mm straight in line socket to 1.8m unterminated cable, sold separately)For direct connection to a panel socket the mating connection is 487-832 or 448-370Protected ...
