Battery Charger Mounting Brackets

Battery charger mounting brackets are used to attach modules for recharging batteries to a wall, frame, or other surface. The battery charger can be placed in the mounting bracket, allowing a user to access the battery easily, and enabling them to quickly see its condition and degree of charge from the LED display. They may also provide storage space for accessories such as the cables and battery clips that come with the charger.

What are battery charger mounting brackets used for?

Battery charger mounting brackets are most commonly used when a battery charger has to be easily accessible when needed. They also allow the charger to remain continuously connected, which means that the battery can be used any time.

Types of battery charger mounting brackets

The main way battery charger mounting brackets differ from one another is that they are designed to be used with different types of charger. This may mean that their sizing or composition is slightly different, but they are all broadly similar in functionality.


...
Read more Read less

Filters

Viewing 1 - 2 of 2 products
Results per page
Description Price For Use With
RS Stock No. 423-7593
Mfr. Part No.9000000128
BrandMascot
£3.62
Each
Units
1.3A Mascot Lead Acid Charger, 2.3A Mascot Lead Acid Charger
RS Stock No. 423-7600
Mfr. Part No.9000000129
BrandMascot
£5.94
Each
Units
2A Mascot Lead Acid Charger, 4A Mascot Lead Acid Charger
Related Products
The CTEK MXS 25 EC features the same ...
Description:
The CTEK MXS 25 EC features the same specification as the MXS25, but with extended leads, allowing the charger to be mounted remotely and leads run to the vehicle. Ideal with garages and workshops, or other professional applications. Input voltage AC 220-240Vac, 50-60HzCharging voltage - 12VSulphated battery recovery - YesSoft ...
The RS Pro 851-7492 is a 28Amp 12/24V ...
Description:
The RS Pro 851-7492 is a 28Amp 12/24V automotive battery charger for regular and low maintenance batteries.The charger is in a steel case with a carry handle. It features an ammeter display to show charging rate. There are various switches of the front of the charger to control outputs to ...
Optional sensor with 3 m integral lead that ...
Description:
Optional sensor with 3 m integral lead that allows Sentinel chargers to measure battery temperature, and optimise charging by automatic compensation of the DC output voltage.For correct operation, the sensor head can be mounted on or close to the batteries being charged.
Panel mounting cylindrical battery holders for standard cell ...
Description:
Panel mounting cylindrical battery holders for standard cell sizesQuick and easy replacement of batteriesAll holders are moulded in black plasticBayonet fixing front cap with a coin slot for easy removalA supplementary rear support tag should be used on dual cell holders2xD holder can be separated to accommodate a single D ...