Pressure Sensors

Pressure sensors are devices that sense the applied pressure of gases or liquids. The output of the measurement is then converted into an electrical signal which reflects the amount of pressure applied.


There are various different technologies used within pressure sensors. Depending on the requirements, this can influence their sensing accuracy and reliability. When the mechanical displacement within the sensor is turned into an electrical output signal there are 5 ways this can happen.


Resistive - These types of sensors use the change in electrical resistance of a strain gauge connected to the diaphragm.


Capacitive - Are highly sensitive and are able to measure low-pressure under 10 bar while still withstanding large overloads.


Piezoelectric - These sensors use substances like Quartz to generate a charge on the surface when pressure is applied. Piezoelectric pressure sensors are ideal for measuring fast changing pressures.


Optical - These use interferometry to measure pressure changes in optical fibre. They are not disturbed by EMI and can be used in noisy or medical environments.


MEMS - This stands for micro-electro-mechanical system and contains capacitive or piezo pressure sensing mechanisms on silicon at micron level resolution.


Types of Pressure Sensors


Within the sensors, there are various properties which can be used to classify them. This includes what pressure range they measure, their operating temperature range or the pressure type they measure.


Absolute Pressure Sensor - This type of sensor measures pressure relative to the perfect vacuum (zero reference point).


Gauge Pressure Sensors - These are often used to measure atmospheric pressure and are sometimes referred to as relative pressure sensors.


Sealed Gauge Pressure Sensor - Similar to a gauge pressure sensor except they measure pressure relative to a fixed pressure, not the current ambient atmospheric pressure which can vary.


Differential Pressure Sensors - These can be used to measure the difference between two different pressures (differential pressure) which can be connected to either side of the sensor. They are often used to measure pressure drops, fluid levels and flow rates.


Pressure Sensor Applications


Pressure sensors are used in many applications in a large range of industries. These include medical, aviation, automotive and marine.


...
Read more Read less

Filters

Viewing 81 - 100 of 1070 products
Results per page
Description Price Pressure Reading Type Minimum Pressure Reading Maximum Pressure Reading Accuracy Output Type Media Measured Calibrated Process Connection Analogue Output Electrical Connection Response Time Maximum Current Supply Voltage Interface
RS Stock No. 828-5704
BrandRS PRO
£206.98
Each
Units
Absolute 0mbar 1000mbar <±0.5 % Current Oil, Water - BSP 1/4 4 → 20 mA DIN 43650 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 828-5732
BrandRS PRO
£153.97
Each
Units
Gauge 0mbar 750mbar <±0.25 % Current Oil, Water - BSP 1/4 4 → 20 mA DIN 43650 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 828-5767
BrandRS PRO
£161.94
Each
Units
Gauge 0bar 10bar <±0.25 % Current Sewage, Viscous Fluid, Water - G3/4 4 → 20 mA M12 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 123-5247
BrandRS PRO
£368.53
Each
Units
Gauge 0mbar 750mbar ±0.25 % Analogue Air, Hydraulic Fluid, Liquid, Non-Aggressive Gas, Oil, Water - G1/4 0 → 5 V, 4 → 20 mA Battery - - - -
RS Stock No. 828-5748
BrandRS PRO
£149.49
Each
Units
Gauge 0mbar 1000mbar <±0.25 % Voltage Oil, Water - BSP 1/4 0.5 → 4.5 V DIN 43650 Connector - 6 mA 9 → 32 V dc -
RS Stock No. 102-4156
BrandRS PRO
£277.13
Each
Units
Gauge 0mbar 500mbar ±0.25 % Analogue Oil - BSP 1/4 4 → 20 mA DIN 46350 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 828-5814
BrandRS PRO
£161.94
Each
Units
Gauge -1bar 5bar <±0.25 % Current Water - G3/4 4 → 20 mA M12 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 828-5811
BrandRS PRO
£161.94
Each
Units
Gauge -1bar 1bar <±0.25 % Current Sewage, Viscous Fluid, Water - G3/4 4 → 20 mA M12 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 102-4154
BrandRS PRO
£277.13
Each
Units
Gauge 0mbar 100mbar ±0.25 % Analogue Oil - BSP 1/4 4 → 20 mA DIN 46350 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 828-5776
BrandRS PRO
£161.94
Each
Units
Gauge 0bar 20bar <±0.25 % Current Sewage, Viscous Fluid, Water - G3/4 4 → 20 mA M12 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 102-4140
BrandRS PRO
£288.00
Each
Units
Gauge 0bar 10bar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid - BSP 3/4 4 → 20 mA M12 4-pin - 28 mA 12 → 28 V dc -
RS Stock No. 828-5820
BrandRS PRO
£161.94
Each
Units
Absolute 0bar 1bar <±0.25 % Current Sewage, Viscous Fluid, Water - G3/4 4 → 20 mA M12 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 102-4157
BrandRS PRO
£271.70
Each
Units
Gauge 0mbar 750mbar ±0.25 % Analogue Oil - BSP 1/4 4 → 20 mA DIN 46350 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 828-5739
BrandRS PRO
£153.97
Each
Units
Gauge 0mbar 1000mbar <±0.25 % Current Oil, Water - BSP 1/4 4 → 20 mA DIN 43650 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 102-4146
BrandRS PRO
£297.25
Each
Units
Gauge -1bar 5bar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid - BSP 3/4 4 → 20 mA M12 4-pin - 28 mA 12 → 28 V dc -
RS Stock No. 102-4139
BrandRS PRO
£173.60
Each
Units
Gauge 0bar 5bar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid - BSP 3/4 4 → 20 mA M12 4-pin - 28 mA 12 → 28 V dc -
RS Stock No. 102-4158
BrandRS PRO
£269.06
Each
Units
Gauge 0mbar 1000mbar ±0.25 % Analogue Oil - BSP 1/4 4 → 20 mA DIN 46350 Connector - 28 mA 9 → 32 V dc -
RS Stock No. 102-4149
BrandRS PRO
£133.67
Each
Units
Absolute 0bar 1bar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid - BSP 3/4 4 → 20 mA M12 4-pin - 28 mA 12 → 28 V dc -
RS Stock No. 102-4134
BrandRS PRO
£391.34
Each
Units
Gauge 0mbar 100mbar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid - BSP 3/4 4 → 20 mA M12 4-pin - 28 mA 12 → 28 V dc -
RS Stock No. 102-4152
BrandRS PRO
£288.59
Each
Units
Absolute 0bar 10bar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid - BSP 3/4 4 → 20 mA M12 4-pin - 28 mA 12 → 28 V dc -
Related Products
RS Pro IWPT series wireless pressure transducer is ...
Description:
RS Pro IWPT series wireless pressure transducer is an effective replacement to a traditionally wired pressure transducer in inaccessible and expensive installation environments. It is easily paired to the compatible RS Pro IWR family of wireless receivers, thus offering a “plug and play” solution to your pressure measurement applications.The instrument ...
Introducing Druck's UNIK 5000 pressure sensing platform, a ...
Description:
Introducing Druck's UNIK 5000 pressure sensing platform, a range of sensing components that are ideal for measurement and control solution. The pressure sensing platform allows users to seamlessly build up their own sensor which can cater to their precise requirements. The UNIK 5000 pressure sensing platform offers high performance, configurable ...
The IND series is suitable for a wide ...
Description:
The IND series is suitable for a wide range of industrial applications. It has a probe which uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing. Piezo-resistive thick film ceramic sensorStainless steel body+/- 0.25% accuracyDifferent outputs including mV, Volts and mAMicroprocessor based amplifierOperating temperature: -20 ...