- RS Stock No.:
- 263-6005
- Brand:
- RS PRO
- RS Stock No.:
- 263-6005
- Brand:
- RS PRO
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- NL
Product Details
RS PRO Servo Motor, 30 W, 24 V to 30 V, 36 Ncm, 1600 rpm, 6 mm Shaft Diameter
Need a DC servo motor that offers precise speed control? Choose this servo motor from RS PRO. It comes pre-fitted with a tachogenerator that ensures smooth operation over a wide range of velocities.
This servomotor comes with a skewed ironless rotor, so it offers quick acceleration and an output speed of 1600 rpm (revolutions per minute). Carbon brushes transfer the electrical current without a spark, meaning you can be sure of a long service life.
The servomotor is a popular choice in motion and positioning applications where you need to fit a custom drive or gearbox to control the output. This makes it especially handy for use in industrial robotics, toy cars and in-line manufacturing applications. It's typically used along with linear DC servo amplifiers to ensure a continuous flow of power to the motor with minimal noise.
This servomotor comes with a skewed ironless rotor, so it offers quick acceleration and an output speed of 1600 rpm (revolutions per minute). Carbon brushes transfer the electrical current without a spark, meaning you can be sure of a long service life.
The servomotor is a popular choice in motion and positioning applications where you need to fit a custom drive or gearbox to control the output. This makes it especially handy for use in industrial robotics, toy cars and in-line manufacturing applications. It's typically used along with linear DC servo amplifiers to ensure a continuous flow of power to the motor with minimal noise.
Features and Benefits
Servo DC motor type
Current rating of 1.3 A
Power rating of 30 W
Length of 134 mm
Width of 66 mm
Shaft diameter of 6 mm
Maximum output torque of 36 Ncm (Newton centimetre)
Output speed of 1600 rpm (revolutions per minute)
Stall torque of 14 Ncm (Newton centimetre)
Supply voltage of 24 V to 30 V DC
Current rating of 1.3 A
Power rating of 30 W
Length of 134 mm
Width of 66 mm
Shaft diameter of 6 mm
Maximum output torque of 36 Ncm (Newton centimetre)
Output speed of 1600 rpm (revolutions per minute)
Stall torque of 14 Ncm (Newton centimetre)
Supply voltage of 24 V to 30 V DC
Specifications
Attribute | Value |
---|---|
Maximum Output Torque | 36 Ncm |
Supply Voltage | 24 → 30 V |
Output Speed | 1600 rpm |
Power Rating | 30 W |
Stall Torque | 14Ncm |
Shaft Diameter | 6mm |
Length | 134mm |
Width | 66mm |
Current Rating | 1.3 A |
Rotor Inertia | 0.214kg.cm² |