Sensata / Cynergy 3 RSF70 Series Horizontal External Polyphenylene Sulfide Float Switch, Float, 1m Cable, NO/NC
- RS Stock No.:
- 725-9858
- Mfr. Part No.:
- RSF76H100RN
- Brand:
- Sensata / Cynergy3
- RS Stock No.:
- 725-9858
- Mfr. Part No.:
- RSF76H100RN
- Brand:
- Sensata / Cynergy3
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Cynergy3 Horizontal Float Switches
Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.
WRAS approval explained
WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.
What materials can you choose from?
Nylon
Polypropylene
Polypropylene Sulfide (PPS)
Polypropylene
Polypropylene Sulfide (PPS)
Features and Benefits
Operating temperature: -10 °C to +120 °C
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
Typical Applications
These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.
Note
Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.
This float switch is designed for fitting through a tank wall from the outside where access to the internal fitting is not possible. The float switch is fitted in a 23 mm dia. hole in the tank from the outside and secured by a compression seal with a backnut.
PPS material
External mounting
Compression seal
100cm PVC flying lead
WRAS approved
External mounting
Compression seal
100cm PVC flying lead
WRAS approved
Product Application Information
This PPS float switch is suitable for use in most organic and inorganic chemicals and most oils. Typical applications include vending machines, commercial dishwashers and auxiliary tanks on vehicles
Specifications
Attribute | Value |
---|---|
Device Type | Float |
Mounting Type | Horizontal External |
Switch Output | NO/NC |
Body Material | Polyphenylene Sulfide |
Cable Length | 1m |
Minimum Operating Temperature | -10°C |
Maximum Operating Temperature | +120°C |
Maximum Current | 600 mA |
Gasket Material | Nitrile |
Series | RSF70 |
Related links
- RS PRO Horizontal External Polypropylene Float Switch SPNO 120V dc Max
- Sensata / Cynergy3 LLF 70 Series Horizontal External Polyphenylene...
- Sensata / Cynergy3 RSF70 Series Horizontal Polyvinylidene Fluoride...
- Sensata/Cynergy 3 RSF80 Series Horizontal External Polyphenylene...
- Sensata/Cynergy 3 RSF70 Series Horizontal External Nylon Float...
- Sensata / Cynergy3 RSF70 Series Horizontal Polyphenylene Sulfide...
- Sensata/Cynergy 3 RSF70 Series Horizontal External Polyphenylene...
- Sensata / Cynergy 3 RSF70 Series Horizontal External Polypropylene...