RS PRO Carbon Steel Eye Bolt, M16 Thread, 20mm Thread Length, 20mm Internal Eye Diameter, 44mm Outer Eye Diameter, 0.8t
- RS Stock No.:
- 673-658
- Brand:
- RS PRO
- RS Stock No.:
- 673-658
- Brand:
- RS PRO
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Product Details
RS PRO Eye Bolts
These Eye Bolts from our own RS PRO brand are intended for linear pulling loads in the direction of the thread.
Features and Benefits
Galvanised steel construction
Easy to inspect for damage
Shock absorbing
High resistance to abrasion
Fatigue rated at 1 – times the working load limit at 20 000 cycles
UNC (unified coarse pitch) thread
Easy to inspect for damage
Shock absorbing
High resistance to abrasion
Fatigue rated at 1 – times the working load limit at 20 000 cycles
UNC (unified coarse pitch) thread
Applications
These Eye Bolts are suitable for wide variety of applications such as tensioning wires, securing loads and lifting applications.
Not intended for use where the load is perpendicular to the thread. This is because in these instances the bolt could unscrew and move, or it could be twisted and break.
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Note
When lifting, two or more eyebolts should be used. Safe working load detailed in 'dimensions' table;
Not intended for use where the load is perpendicular to the thread. This is because in these instances the bolt could unscrew and move, or it could be twisted and break.
Not intended for use where the load is perpendicular to the thread. This is because in these instances the bolt could unscrew and move, or it could be twisted and break.
Specifications
Attribute | Value |
---|---|
Thread Size | M16 |
Thread Length | 20mm |
Eye Diameter | 20mm |
Type | Eye Bolt |
Outer Diameter | 44mm |
Working Load Limit | 0.8t |
Material | Carbon Steel |
Related links
- RS PRO Carbon Steel Eye Bolt 51mm Thread Length 96mm Outer Eye Diameter, 4t
- RS PRO Carbon Steel Eye Bolt 18mm Thread Length 33mm Outer Eye...
- RS PRO Carbon Steel Eye Bolt 18mm Thread Length, 33mm Outer Eye Diameter
- RS PRO Carbon Steel Eye Bolt 18mm Thread Length 33mm Outer Eye...
- RS PRO Galvanised Steel Eye Bolt 17mm Thread Length 45mm Outer Eye Diameter
- RS PRO Carbon Steel Eye Bolt 27mm Thread Length 59mm Outer Eye...
- RS PRO Carbon Steel Eye Nut 20mm Internal Eye Diameter 0.14t Load
- RS PRO Steel Eye Bolt 23mm Thread Length 44mm Outer Eye Diameter, 0.5t