- RS Stock No.:
- 384-9050
- Mfr. Part No.:
- 985895
- Brand:
- Facom
Available to back order for despatch 07/06/2024
Price Each
£50.62
(exc. VAT)
£60.74
(inc. VAT)
Units | Per unit |
1 + | £50.62 |
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 384-9050
- Mfr. Part No.:
- 985895
- Brand:
- Facom
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- FR
Product Details
Serkan ergonomic crimp tools with ratchet system
Facom crimp tools are known for its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The construction manufactured for lightweight yet durable materials guarantee long life and hassle-free operation. Ergonomically shaped and rubber-coated handles increases anti-slip, safety and comfort, so even longer operating is injury-free.
Features and Benefits:
High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles)
Double crimping (pre-insulated terminals)
Reverse crimping: terminal is placed in the fixed part for greater precision
Stainless steel dies
Ambidextrous pliers
Typical Applications:
Maintenance & repair
Electrical Installations
Cable assemblies
FAQs:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.
How do you maintain the product?
Axles and other movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
Features and Benefits:
High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles)
Double crimping (pre-insulated terminals)
Reverse crimping: terminal is placed in the fixed part for greater precision
Stainless steel dies
Ambidextrous pliers
Typical Applications:
Maintenance & repair
Electrical Installations
Cable assemblies
FAQs:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.
How do you maintain the product?
Axles and other movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
Specifications
Attribute | Value |
---|---|
Series | 985 |
Product Type | Crimp Tool |
Operation | Hand |
For Use With | Wire Ferrules |
Wire Size mm² | 0.5 → 6mm² |
Overall Length | 230 mm |
Related links
- Facom Hand Crimp Tool for Wire Ferrules
- Facom 985 Hand Crimp Tool for Wire Ferrules, 0.5 → 2.5mm² Wire
- Facom Hand Crimp Tool for Insulated Terminals
- CK Hand Crimp Tool for Wire Ferrules
- MECATRACTION Hand Operated Mechanical Crimping Tools Hand Crimp...
- Legrand Starfix 0 376 09 Hand Crimp Tool for Starfix Wire Ferrules
- Knipex Hand Crimp Tool for Twin Wire Ferrules
- Knipex Hand Crimp Tool for Wire Ferrules