The Watchdog 220° MasterLINE is an electronic movement detector for detecting thermal motion.

Remote operation via IR remote control (RS 777-7735)
Remote configurable via IR service remote control (RS 777-7738)
Display for detection and operation mode
Ground and rear-field detection
High-quality lens for optimum detection
Detection sensitivity adjustable via IR remote control
Surveillance density: 84 sectors with 336 switching segments
Integrated dismantling protection
All functions controlled by microprocessor
Continuous light (4 hours), light deactivation (4 hours) and presence simulation can be activated via IR remote control
Reading in the current brightness value as switching threshold via remote control
Automatic range stabilization
Automatic interference suppression
Automatic dazzle-proofing
Brightness-independent test mode for evaluating the detection zone
Individual adjustment of detection range via enclosed protective foil which can be cut to size
Additional possibility for switch-on via normally open push-button switch
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec adjustable
Rated voltage: 230 V∼, +10% / -10%
Rated frequency: 50 Hz - 60 Hz
Power dissipation: 1 W
Outputs: 1 Normally open contact, potential-bound
Suitable for: ohmic, capacitive and inductive loads
Rated current: 16 AX, cos φ0.6
Rated power: 3680 W/VA
Protection class (Device): IP 55
Temperature range (Device): -25 °C - 55 °C
Detection range: frontal: 16 m lateral: 16 m
Brightness limit value: 0.5 Lux - 300 Lux - , Daytime operation
Detection angle: 220°
Dimensions: (L x W x D): 115 mm x 125 mm x 141 mm
Mounting height: 2.5 m

In combination with a relay/contactor, an RC suppressor has to be used (ABB Part No 6899)

ABB Busch-Watchdog 220/280 MasterLINE Movement Detectors