Switch, Dual 50/200mm, NO/NO
Price Each | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Please log in to see latest prices
Register / Log In
In stock for next working day delivery
| ||||||||
|
|
|
Specifications
| Body Material | Stainless Steel | |
| Cable Length | 100cm | |
| Device Type | Float | |
| Gasket Material | Nitrile | |
| Maximum Current | 0.6 A | |
| Maximum Operating Temperature | +135°C | |
| Maximum Pressure | 10bar | |
| Minimum Operating Temperature | -20°C | |
| Mounting Type | Vertical | |
| Switch Output | NO/NC |
Quickly find other suitable products by removing those features above which are not essential and clicking Find.
Find
Dual Position Stainless Steel Float Switch
Two independent switching points
Lower float make on fall, and upper float make on rise
Minimum fluid SG: 0.80
Switch differential (each level) nominal: 1mm
Suitable for high and low level alarm and control signal
In stainless steel 316L for use with aggressive liquids, or in hygienic applications
Vertical Mounting, M16 x 2 thread
Temperature Range: -20 to +135°C
Nitrile gasket
’Safe Area’ for use in petrochemical, storage, and process control applications
| Technical specification | |
| Min. fluid S.G. | 0.80 |
| Min. high level | 25mm |
| Switch differential (each level) nominal | 1mm |
Note
All ratings in tech. spec. table are for resistive loads only
Vertical Float Switches
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.