Check our stock volumes
|Body Orientation||Right Angle|
|Contact Material||Copper Alloy|
|Mounting Type||Surface Mount|
|Number of Contacts||50|
|Number of Rows||2|
Quickly find other suitable products by removing those features above which are not essential and clicking Find.
Mini D Ribbon (MDR) 102 Series Receptacles with Ground Lock
These 3M Mini D Ribbon (MDR) 102 Series PCB shielded right angle receptacles have M2.5 lockdown threads. The design of these MDR 102 Series PCB shielded receptacles incorporates a latching interface for connector stability.
Female right angled Mini Delta Ribbon sockets, for surface-mounted soldering (SMT).
Identical pin length for both rows of contacts: ensures excellent signal synchronisation.
Connectors for digital connections: limited signal loss, high frequencies.
Applications: LCD interfacing, graphics cards, flat screens, LVDS terminals.
Excellent EMI / RFI protection.
|Contact:||copper alloy, 0.5 μm gold-plated on nickel undercoat|
Mini Delta Ribbon (MDR)
Cable mount plugs and PCB mount receptacles with pre-loaded ribbon contacts for long life
Finger releasable latching backshells for cable mounting applications
Plugs available to accept either discrete wire or IDC cables. See stock no 515-7460 or stock no. 163-3285 and range.
A Mini Delta Ribbon (MDR) system designed for high density I/O applications on a 1.27mm pitch.
|All products adhere to the following specification, with exceptions as noted below.|
|Body material:||Glass filled polyester (PBT)|
|Class II sockets||0.76μm gold|
|Cable plugs||0.76μm gold|
|D connectors||0.76μm gold|
|Board mount sockets||0.3μm gold|
|Class III sockets||0.38μm gold|
|Class II headers||0.76μm gold|
|Class III headers||0.38μm gold|
|Transition connectors||Tin plated|
|Insulation resistance:||1´109 ohms min. at 500Vdc|
|Current rating:||1A (headers 2A)|
|Withstanding voltage||1000V r.m.s.|
|Temperature range:||-55°C to +105°C|
|Class II||200 mating cycles|
|Class III||50 mating cycles|
|Note: 'D' type connectors include steel shells. Latches for Class III headers are of nylon.|