UKAS(6698322) Industrial IP67
Price Each | ||||
|---|---|---|---|---|
|
Please log in to see latest prices
Register / Log In
In stock for next working day delivery
| ||||
|
|
Not available for premium delivery
Specifications
| Absolute Maximum AC Current Measurement | 10A ac | |
| Absolute Maximum AC Voltage Measurement | 1000V ac | |
| Absolute Maximum Capacitance Measurement | 9999μF | |
| Absolute Maximum DC Current Measurement | 10A dc | |
| Absolute Maximum DC Voltage Measurement | 1000V dc | |
| Absolute Maximum Resistance Measurement | 50MΩ | |
| AC Current Measurement Resolution | 0.1μA ac | |
| AC Voltage Measurement Resolution | 0.1mV ac | |
| Application | Electrical | |
| Battery Life | 800 h | |
| Battery Type | AA x 3 | |
| Best AC Current Accuracy | ±1.5% + 2 Digits | |
| Best AC Voltage Accuracy | ±3% + 3 Digits | |
| Best Capacitance Measurement Accuracy | ±1% + 2 Digits | |
| Best DC Current Accuracy | ±0.2% + 2 Digits | |
| Best DC Voltage Accuracy | ±0.1% + 1 Digit | |
| Best Resistance Measurement Accuracy | ±0.05% + 1 Digit | |
| Capacitance Measurement Resolution | 0.01nF | |
| DC Current Measurement Resolution | 0.1μA dc | |
| DC Voltage Measurement Resolution | 0.1mV dc | |
| Dimensions | 19.81 x 10 x 6.35cm | |
| Functions Measured | AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Diode, Frequency, Resistance | |
| Height | 6.35cm | |
| Length | 19.81cm | |
| Maximum Frequency | 20kHz | |
| Maximum Operating Temperature | +55°C | |
| Minimum Operating Temperature | -15°C | |
| Model Number p | 27-II | |
| Multimeter Type | Handheld | |
| Resistance Measurement Resolution | 0.1Ω | |
| Safety Category | CAT III 1000 V, CAT IV 600 V | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 1000 V, 600 V | |
| True RMS | Yes | |
| Weight | 698.5g | |
| Width | 10cm |
Quickly find other suitable products by removing those features above which are not essential and clicking Find.
Find
Fluke 27 II & 28 II: Rugged IP67 Industrial Multimeters
IP67 rated multimeter for operating in harsh conditions with features and accuracy to troubleshoot most electrical problems
Designed to withstand 3 metre drop
-15° C to + 55°C extended operating temperature range
Extended AC voltage bandwidth, 15Hz to 20 kHz
Average responding voltage and current for measurements
Easy to read large digit display with a bright, two-level backlight
Backlit keypad buttons allows for easy visibility in low-lit areas
Reversible holster for added protection when not in use
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
Sleep mode for long battery life
Relative mode to remove test lead resistance from low ohms measurements
Min/Max and average recording
Auto and manual ranging for maximum flexibility
Resistance, continuity and diode test
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
US Mine Safety & Health Administration approval (MSHA)
Dimensions: 61 X 102 X 203 mm
Safety rating CAT IV 600 V , CAT III 1000V
28-II additional features:
Hi Resolution 20,000 count display mode
True-rms ac voltage and current for accurate measurements on non linear signals
Low pass filter function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
K Type thermocouple temperature measurement. ( 80BK-A Integrated DMM thermocouple supplied)
| Specification | 27 II | 28 II |
| Capacitance Measurement | 1 nF → 9999 μF | 1 nF → 9999 μF |
| Frequency Measurement | 0.5Hz → 199.99 kHz | 0.5Hz Hz → 199.99 kHz |
| Temperature Measurement | - | -200 °C → +1090 °C |
| Low pass filter | - | Yes |
Supplied with
Holster, test leads and crocodile clips, manual and 3 AA alkaline batteries (800 Hrs)
Fluke
Note
For a selection of Fluke test leads and accessories see "Fluke Accessories" Range in this Section