RSCAL(5391929),Fluke 87-V DMM Ex
| |||
|
Specifications
| Absolute Maximum AC Current Measurement | 10A ac | |
| Absolute Maximum AC Voltage Measurement | 1000V ac | |
| Absolute Maximum Capacitance Measurement | 9999μF | |
| Absolute Maximum DC Current Measurement | 10A dc | |
| Absolute Maximum DC Voltage Measurement | 1000V dc | |
| Absolute Maximum Resistance Measurement | 50MΩ | |
| Absolute Maximum Temperature Measurement | +1090°C | |
| AC Current Measurement Resolution | 0.1μA ac | |
| AC Voltage Measurement Resolution | 0.1mV ac | |
| Battery Life | 400 h | |
| Battery Type | 9V | |
| Best AC Current Accuracy | ±1% + 2 Digits | |
| Best AC Voltage Accuracy | ±2% + 4 Digits | |
| Best Capacitance Measurement Accuracy | ±1% + 2 Digits | |
| Best DC Current Accuracy | ±0.2% + 2 Digits | |
| Best DC Voltage Accuracy | ±0.05% + 1 Digit | |
| Best Resistance Measurement Accuracy | ±1% + 3 Digits | |
| Best Temperature Measurement Accuracy | ±1% + 1 °C | |
| Capacitance Measurement Resolution | 10nF | |
| DC Current Measurement Resolution | 0.1μA dc | |
| DC Voltage Measurement Resolution | 0.1mV dc | |
| Dimensions | 18.6 x 8.6 x 3.1cm | |
| Functions Measured | AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance, Temperature | |
| Height | 3.1cm | |
| Length | 18.6cm | |
| Maximum Frequency | 20kHz | |
| Maximum Operating Temperature | +55°C | |
| Minimum Operating Temperature | -20°C | |
| Model Number p | 87V | |
| Multimeter Type | Handheld | |
| Resistance Measurement Resolution | 0.1Ω | |
| Safety Category | CAT III 1000 V, CAT IV 664 V | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 1000 V, 664 V | |
| Temperature Measurement Resolution | 0.1°C | |
| True RMS | Yes | |
| Weight | 355g | |
| Width | 8.6cm |
Quickly find other suitable products by removing those features above which are not essential and clicking Find.
Find
Fluke 87-V Ex
The Fluke 87-V Ex is an intrinsically safe version of the Fluke 87V.It has measurement functions, troubleshooting features, plus the resolution and accuracy to solve problems on motor drives, in plant automation, power distribution and electromechanical equipment. Additionally, it has an intrinsically safe rating and ATEX certification for use in hazardous areas. A general-purpose measurement tool that can be used in environments such as (petro-)chemical plants, the pharmaceuticals industry and other locations subject to risk of explosion.
ATEX safety rating for use in Zone 1 and Zone 2
Large digital display with bright, two-level backlight makes the 87-V Ex very easy to read
Built-in thermometer for convenient temperature readings
True rms ac voltage and current for accurate measurements on non-linear signals
Measure up to 1000V (ac/dc) and 10A (ac/dc) with a very wide 20kHz bandwidth
Selectable filter for accurate voltage and frequency measurements on motor drives
4.5 digit mode for precise measurements (20000 counts)
Frequency to >200kHz and % duty cycle
Resistance, conductance, continuity and diode test
10000μF capacitance range for components and motor caps
Min/Max-Average recording with Min/Max Alert to capture variations automatically
Touch Hold® to capture stable readings avoiding noisy signals
Peak capture to record transients as fast as 250μs
Relative mode to remove test lead interference from low ohm measurements
Auto and manual ranging for maximum flexibility
Analog bar graph for fast changing or unstable signals
Input Alert provides audible warning against wrong use of input jacks
Selectable sleep mode for long battery life
EN61010-1 rating CAT IV 600V, CAT III 1000V
| DC Voltage Accuracy | ±0.05% + 1 |
| DC Voltage Highest Range | 1000V |
| AC Voltage Accuracy | ±0.7% + 2 |
| AC Voltage Highest Range | 1000V |
| DC Current Highest Range | 10A |
| AC Current Highest Range | 10A |
| Resistance Accuracy | ±0.2% + 1 |
|
Fluke
Note
For a selection of Fluke test leads and accessories see "Fluke Accessories" Range in this Section