• RS Stock No. 123-8853
  • Brand Aim-TTi
  • Mfr. Part No. 1908
Aim-TTi
Aim-TTi 1908 Bench Digital Multimeter
Product Details

Aim-TTi 1908 Series Dual Measurement Bench Multimeter

Aim-TTi 1908 Series is a dual measurement, dual display bench-top/portable multimeter. It features continuity and diode test, automatic or manual ranging, linear scaling with offset, dB measurements, limits comparison, percentage deviation (%), min-max storage, power measurement in watts or VA, automatic data logging and external triggering. The logger function can store up to 500 readings from the main display in non-volatile memory. The two displays can be used to display a measurement along with the selected range (e.g. 100 Vdc), a measurement in two different units (e.g. AC volts and dBm), the result of a calculated function (e.g. value and % deviation), two parameters of one signal (e.g. AC and DC volts) or two different signals (e.g. AC volts and DC current). Software 1908-PC Link provides remote control of main functions and logging function with graphical and tabular displays (logged data can be exported to a CSV file). Model 1908P can be remotely controlled via its RS232, USB, GPIB or LAN interface. Model 1908 (non ’P’) can only be controlled via USB.

Features and Benefits

Affordable 5.5 digit high performance bench/portable multimeter, 120 000 counts
Dual display (main display and secondary display) and dual measurement capability
Mains power or Internal rechargeable batteries for true portability
High accuracy and resolution 0.02%, 1 μV, 0.1 μA, 1 mΩ
Manual or Auto-ranging
True RMS AC and AC+DC measurement
DC and AC volts, DC and AC current, resistance, capacitance, frequency, and temperature measurement
Measurement post-processing
Continuity and diode checks
Two or four wire selectable ohms measurement
Display nulling and ohms null
Selectable measurement speed
Touch hold mode - holds onto a stable reading until updated
500 point data logger with timer
Temperature measurement for PT100 or PT1000 sensors
Wide range of computing functions e.g. Ax + B
External input/output remote triggering
Closed case calibration
USB interface standard (1908 & 1908P) plus RS232, LAN/LXI and GPIB interfaces (1908P only)
Kensington security slot incorporated
Dimensions 250 x 97 x 295 mm
Weight 3.2 kg

Note

In dual measurement mode a completely independent but complementary measurement can be made and displayed on the secondary display. The two independent measurements are made alternately, not simultaneously, and the display update rate for each measurement is consequently reduced (this is not the same as dual display mode, where both a measurement and a modified version of that measurement are displayed e.g. ac Volts and the dB equivalent).

Standards

EN61010-1, EN61010-2-030 & EN61010-2-033, EN61326-1 EMC

Supplied with

IVI driver, LV/CVI driver, USB driver

Specifications
Not what you’re looking for? Select the attributes you require, then click the button below
Multimeter TypeBench
Absolute Maximum Resistance Measurement1000Ω
Absolute Maximum Capacitance Measurement100µF
Absolute Maximum Temperature Measurement+400°C
Functions MeasuredAC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature
True RMSYes
ApplicationElectrical
Maximum Frequency100kHz
Display TypeLCD
Model Number p1908
DC Current Measurement Resolution100nA
AC Current Measurement Resolution100nA
AC Voltage Measurement Resolution1µV
Resistance Measurement Resolution1mΩ
DC Voltage Measurement Resolution1µV
Capacitance Measurement Resolution10pF
Temperature Measurement Resolution0.1°C
Safety CategoryCAT II 600 V
Minimum Operating Temperature+5°C
Battery TypeRechargeable NiMH
Safety Category LevelCAT II
Best Temperature Measurement Accuracy0.05 %
Width235mm
Best DC Current Accuracy0.05 %
Dimensions260 x 235 x 88mm
Best DC Voltage Accuracy0.02 %
Length260mm
Maximum Operating Temperature+40°C
Height88mm
Best Resistance Measurement Accuracy0.05 %
Best AC Voltage Accuracy0.3 %
Best Capacitance Measurement Accuracy2 %
Battery Life>20 (Enabled Backlight) h, >35 (Disabled Backlight) h
Weight2kg
Best AC Current Accuracy0.35 %
Safety Category Voltage600V
Select all
Customer reviews

Add a review - Log In

6 In stock for FREE next working day delivery
£395.00
Price Each
Quantity
Units
Check stock levels
Calibration Options:
What is Calibration?
Calibration is the process of comparing the accuracy of an instrument reading, to known standards. To buy a calibrated instrument, simply order the RSCAL or UKAS version. Please allow an extra 24 hours for delivery.
Technical Reference
  • RS Components

    Statement of conformity


    The product detailed below complies with the specifications published by RS Components. Where applicable it provides assurance that electrostatic discharge sensitive devices have been handled and packed under conditions that meet the administrative and technical requirements of the ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards.
    RS Stock No. 123-8853
    Description Aim-TTi 1908 Bench Digital Multimeter
    Manufacturer/Brand: Aim-TTi
    Mfr. Part No. 1908
    The foregoing information relates to product sold on, or after, the date shown below.
    RS COMPONENTS
    Date Jul 23, 2017
    RS Components Ltd, Birchington Road, Corby, Northamptonshire, NN17 9RS, UK
Similar Products
View Similar Products

Alternative for Aim-TTi 1908 Bench Digital Multimeter

Frequently Asked Questions
Need some help?
Call our Customer Services team on:
08457 201201