Actuonix, Linear Actuator Control Board, Analogue, Digital Control, 5 → 24 V dc, 4 A, Panel Mount

The LAC board from Actuonix is a standalone closed loop control board specially designed for the P series actuators. By using this LAC board with Actuonix actuators you can greatly simplify motor control designs, saving cost and time.
Actuonix motor control IC uses a software-based algorithm which optimises position and speed control. The linear actuator board is then compatible with a wide range of actuators, using only the default settings.
Full customisation is possible due to Actuonix Advanced Configuration Program.
The LAC can be operated as an interface board or a standalone controller with the addition of an external potentiometer and power supply.

This mode allows an actuator to be controlled with just a battery, and a potentiometer to signal the desired position to the actuator.

A standard hobby-type remote-control digital servo interface, compatible with servos and receivers from other manufacturers.

This mode is compatible with PLC devices typically used in industrial control applications.

This mode allows control of the actuator using a single digital output pin from an external micro controller.

This mode allows control of the actuator via the computer.

• Several control modes available
• Compatible with P series actuators
• Can be operated as an interface board or standalone controller

A 6 vdc or 12 vdc power supply is required for operation (not included)

Micro Linear Actuators