2way T shaped mouldedpart,45deg 34mm dia
Loading...
Price Each | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Please log in to see latest prices
Register / Log In
In stock for next working day delivery
| ||||||||
|
|
|
Specifications
| Colour | Black | |
| Inside Diameter Primary | 26.9mm | |
| Inside Diameter Secondary | 13.2mm | |
| Material | Fluid Resistant Elastomer | |
| Maximum Operating Temperature | +150°C | |
| Minimum Operating Temperature | -75°C | |
| Number of Breakouts | 2 | |
| Shrink Temperature | +135°C | |
| Shrunk Diameter Primary | 13.7mm | |
| Shrunk Diameter Secondary | 6.1mm | |
| Type | 45° Side Breakout |
Not quite what you were looking for?
Quickly find other suitable products by removing those features above which are not essential and clicking Find.
Find
Quickly find other suitable products by removing those features above which are not essential and clicking Find.
Find
45° and 90° Side Breakout
T-shaped moulded parts with 45° and 90° side breakouts. Manufactured from DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. For full technical specification on the heatshrink material refer to the DR-25 heatshrink products. RS Stock No. (219-6484) typically
| Dimensions (mm) | |||||||||
| Stock No. | As supplied | After recovery | |||||||
| 45° Breakout | H | J | K | H | J | K | P | R | S |
| 218-1397 | 13.2 | 13.2 | 6.6 | 6.9 | 6.9 | 3.6 | 49 | 23 | 23 |
| 218-1404 | 26.9 | 26.9 | 6.6 | 12.7 | 12.7 | 3.6 | 93 | 41 | 36 |
| 218-1410 | 26.9 | 26.9 | 13.2 | 13.7 | 13.7 | 6.1 | 145 | 70 | 54 |
| 90° Breakout | H | J | K | H | J | K | P | R | S |
| 218-1353 | 6.6 | 6.6 | 6.6 | 3.6 | 3.6 | 3.6 | 30 | 15 | 15 |
| 218-1369 | 13 | 13 | 13 | 6.9 | 6.9 | 6.9 | 59 | 30 | 30 |
| 218-1375 | 26.9 | 26.9 | 26.9 | 13.5 | 13.5 | 13.5 | 120 | 60 | 60 |
Note
The line drawing for the 45° version shows the minimum requirements for design/selection criteria. During production the "H" outlet is over expanded which makes the "K" outlet closer to the "J" outlet - i.e. parallel. During installation the product will recover to the required shape as per line drawing.
|
|