The RepRapPro Ormerod 2 complete 3D printing kit offers extensive versatility and functionality in an easy to assemble kit of parts. 3D printing enables electronics and mechanical engineers to create quick turnaround prototypes and save months in the design cycle.
Using a process known as fused filament fabrication (FFF), the Ormerod builds 3dimensional objects in a variety of colours and plastics. FFF can create almost any shape which can be modelled on a computer, including some which could not be produced by traditional manufacturing techniques at all.
The Reprap software should run on a fairly low powered PC, so long as it can run at least Windows XP or higher (Windows 7 and 8 are fine), or Ubuntu 12.04 or higher. However, the faster the better. Under Mac OS X, 10.6.8 is the minimum requirement, which means the Intel processorbased Macs. This excludes all the old PowerPC (G4, G5) Macs, which have a different architecture, so the software won't run on them
The RepRapPro Ormerod is a single colour 3D printer Full opensource selfreplicating RepRap New 32bit Arduino-compatible Duet electronics enable control via a webbrowser Wiring loom for simple plugin connection - no soldering IR probing, with ambient light compensation, for selfaligned printing - no bed adjustment required Printing materials: ABS, PLA, 1.75mm diameter thermoplastic Build surface: Glass covered PCBheated bed to reduce complexity of assembly and to ensure parts do not warp Computer interface: Ethernet, USB Xcarriage: Three Zadjustable deposition head mounts; one head supplied Motion: Linear ball bearings on X, Y and Z axes Presoldered electronics with builtin microSD card slot for standalone printing
Power Supply:
Worldwide universal voltage Compact no trailing wires Integrated into the machine not a separate box Dedicated 12V supply; not an adapted computer power supply No power distribution PCB needed
Note
The RepRapPro Ormerod is shipped as kit of parts containing all the components required to get you printing. Full assembly is required Technical help can be found by contacting the link: https://reprappro.com/documentation/ormerod-2/
Basic technical competency is recommended for set up, use and on-going maintenance of this 3D printer throughout it's lifetime
Supplied with
All printed parts All hardware (threaded and smooth rods, screws, nuts, washers, belts, bearings etc) Presoldered and programmed electronics MicroSD card + adapter Heated PCB build surface Motors Nozzle assembly and extruder drive mechanism 100m of 1.75mm diameter PLA filament (approx 300g) for printing with Plugs supplied (UK, EU, US, and AUS) Software to run the machine is also provided with both, including the firmware for the electronics 1x reel of filament colour White
Warning
3D Printers should not be left to print unattended.
Attribute
Value
Technology
FDM
Build Volume
200 x 200 x 200mm
Number of Heads
1
Model
Ormerod 2
Multi Material Printing
Yes
Dimensions L x W x H
500 x 460 x 410mm
Filament Diameter
1.75mm
Connectivity
Ethernet
Plug Type
Type A - USA 2-Pin, Type C - European Plug, Type G - British 3-Pin, Type I - Australian 3-Pin